[daip] from Miller Goss
Miller Goss
mgoss at nrao.edu
Thu Oct 4 10:35:23 EDT 2007
Problems with SLICE- I have an optical depth cube and
a noise cube of the same data. (from COMB).
I can plot slices from the optical depths but not the errors. I get
the error
SL2PL1: Task SL2PL (release of 31DEC07) begins
SL2PL1: TICINC: POSITION ROUTINES FAIL ON THIS IMAGE
SL2PL1: GINITL: NOT ENOUGH PIXELS SPECIFIED: X,Y = 0.000E+00 0.000E+00
SL2PL1: FATAL ERROR. DESTROYING BAD PLOT FILE.
SL2PL1: Purports to die of UNNATURAL causes
SL2PL1: mizar 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
But PRTIM shows the error slice is :
ar PRTIM(31DEC07) 321 04-OCT-2007 08:32:49 Page 1
Object=3C123 Imagename=3C123HIMER .OPTD N. 3
X Axis RA---SIN Val= 4 37 4.97 at 358 Inc= -0.050 rot= 0.0
Y Axis DEC--SIN Val= 29 40 10.62 at 469 Inc= 0.050 rot= 0.0
Axis 3 VELO-LSR Val= 4.17556E+03 at 130 rot= 0.0
Axis 4 STOKES Val=Optd at 1 rot= 0.0
CLEAN nit= 2000 BMAJ=0.2270 BMIN=0.1437 BPA= 27.7 Type=Clean
Map scale: 100= 1.0000E+01 LN RATIO
3C123HIMER.OPTD N.3 04:37:04.971 29:40:10.62 4.175556E+03
Optd
345 350 355 360 365 370
469 011 3 2 2 2 2 2 2 2 6 5 3 420 6 4 4 3 4 7 7 7 8 7 7 81016 0 0 0 0 0
PRTIM1: Appears to have ended successfully
PRTIM1: mizar 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
and the optical depth prtim is :
TIM1: Task PRTIM (release of 31DEC07) begins
mizar PRTIM(31DEC07) 321 04-OCT-2007 08:34:18 Page 1
Object=3C123 Imagename=3C123HIMER .OPTD . 3
X Axis RA---SIN Val= 4 37 4.97 at 358 Inc= -0.050 rot= 0.0
Y Axis DEC--SIN Val= 29 40 10.62 at 469 Inc= 0.050 rot= 0.0
Axis 3 VELO-LSR Val= 4.17556E+03 at 130 rot= 0.0
Axis 4 STOKES Val=Optd at 1 rot= 0.0
CLEAN nit= 2000 BMAJ=0.2270 BMIN=0.1437 BPA= 27.7 Type=Clean
Map scale: 100= 1.0000E+02 LN RATIO
3C123HIMER.OPTD.3 04:37:04.971 29:40:10.62 4.175556E+03
Optd
345 350 355 360 365 370
469 0 3 2 2 2 2 3 3 3 2 3 3 2 3 5 3 3 3 3 3 3 3 3 3 2 2 1 2 2 0 0 0 0 0
PRTIM1: Appears to have ended successfully
PRTIM1: mizar 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
and this plots fine in slice and sl2pl.
As usual I must be doing something really silly !
thanks
miller
More information about the Daip
mailing list