[daip] flatn
Rob Ivison, Edinburgh
rji at roe.ac.uk
Thu Apr 5 08:47:10 EDT 2007
i'm having problems with FLATN on an Intel Mac running the latest
AIPS.
i'm trying to mosaic together 6 sets of 37 images, using the GMRT
primary beam correction, cutting off at the half-power point.
my inputs are:
AIPS 1: FLATN: Re-grid multiple fields and pointings to one image
AIPS 1: Adverbs Values Comments
AIPS 1:
----------------------------------------------------------------
AIPS 1: Input images
AIPS 1: INNAME 'LOCK' Image name (name)
AIPS 1: INCLASS 'ICL001' Image name (class)
AIPS 1: INSEQ 1 Image name (seq. #)
AIPS 1: INDISK 1 Image disk drive #
AIPS 1: NFIELD 37 Max number of fields per
AIPS 1: pointing
AIPS 1: NMAPS 6 Number of pointings
AIPS 1: Output image
AIPS 1: OUTNAME 'LOCKMAN-610' Image name (name)
AIPS 1: OUTCLASS 'FLATN' Image name (class)
AIPS 1: OUTSEQ 0 Image name (seq. #)
AIPS 1: OUTDISK 1 Image disk drive #
AIPS 1: IMSIZE 3500 3500 Output image size in pixels
AIPS 1: COORDINA 10 51 Central pixel coordinate
AIPS 1: 57 57 all 0 => use observed
AIPS 1: 21 30
AIPS 1: COOTYPE ' ' Desired projection type
AIPS 1: COOINC 0 0 Desired coordinate increment
AIPS 1: COOREF 0 0 Desired reference pixel
AIPS 1: ROTATE 0 Rotation to be used (deg)
AIPS 1: REWEIGHT 0 0 (1) Interpolation halfwidth
AIPS 1: (2) Minimum fraction of good
AIPS 1: pixels required (0->1/3)
AIPS 1: WEIGHTIT 0 Weight image down by WEIGHTIT
AIPS 1: times radius from center in "
AIPS 1: EDGSKP 55 Skip pixels around the edges
AIPS 1: OPTYPE ' ' For mosaics only (NMAPS>1)
AIPS 1: compute and output expected
AIPS 1: noise ('NOIS') or weight
AIPS 1: ('WEIG').
AIPS 1: APARM *all 0 (1) >0 => do 3-D corr.
AIPS 1: ONLY for snapshots
AIPS 1: (2) Parallactic angle (deg)
AIPS 1: (3) Zenith angle (deg)
AIPS 1: (4-8) radial scaling parms
AIPS 1: (9) Linear scaling
AIPS 1: PBPARM 0.5 1 Beam parameters (NMAPS > 1)
AIPS 1: -3.486 47.749 (1) Cutoff; (2) Use (3)-(7)
AIPS 1: -35.203 10.399 (3)-(7) Beam shape
AIPS 1: 0
AIPS 1: NOISE 31 32 Relative uncertainties by
AIPS 1: 31 29 pointing
AIPS 1: 47 84 *rest 0
AIPS 1: BADDISK *all 0 Disks to avoid for scratch
but it seems to ignore some of them (APARM and some PBPARM) and talks
about 3D corrections (which i have turned off). it also says it is
using the VLA primary beam parameters. finally, it doesn't appear to
perform a PB correction.
any idea what i'm doing wrong?
output reproduced below...
cheers,
Rob
lots of lines saying:
localh> FLATN1: *** I HOPE YOU KNOW WHAT YOU ARE DOING ***
localh> FLATN1: *** WARNING: DOING 3-D CORRECTIONS. ***
localh> FLATN1: *** I HOPE YOU KNOW WHAT YOU ARE DOING ***
localh> FLATN1: *** WARNING: DOING 3-D CORRECTIONS. ***
localh> FLATN1: *** I HOPE YOU KNOW WHAT YOU ARE DOING ***
followed by:
localh> FLATN1: Create LOCKMAN-610 .FLATN . 3 (MA) on disk 1 cno 1081
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 1 included blc,trc 1536 1547 1940 1951
localh> FLATN1: PBCALC: VLA ANTENNA USED FOR ARRAY GMRT
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 2 included blc,trc 1145 1547 1550 1953
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 3 included blc,trc 1535 1157 1940 1561
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 4 included blc,trc 1143 1157 1549 1563
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 5 included blc,trc 1925 1547 2330 1952
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 6 included blc,trc 1536 1937 1940 2341
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 7 included blc,trc 1146 1937 1552 2343
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 8 included blc,trc 1923 1937 2329 2342
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 9 included blc,trc 1926 1157 2332 1562
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 10 included blc,trc 754 1549 1161 1955
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
localh> FLATN1: Field 11 included blc,trc 2314 1548 2721 1955
localh> FLATN1: INTWIN WARNING: DOING 3D CORRECTIONS
ending after 221 images with:
localh> FLATN1: Field 221 included blc,trc 1558 743 1962 1147
localh> FLATN1: Now divide by the sum of the weights
localh> FLATN1: Appears to have ended successfully
localh> FLATN1: localhost 31DEC07 TST: Cpu= 71.1 Real= 174
More information about the Daip
mailing list