[daip] VPLOT
Lynn D. Matthews
lmatthew at cfa.harvard.edu
Wed Oct 25 14:09:05 EDT 2006
I can no longer get VPLOT to work after the recent MNJ change.
It displays the message:
VPLOT1: Task VPLOT (release of 31DEC06) begins
followed by several blank message lines. Then nothing happens and the task
is no longer active. My inputs are appended below.
Lynn
AIPS 1: VPLOT Plots data from a u,v data base, model from a CC file
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME 'BG118A RF229' Input UV file name (name)
AIPS 1: INCLASS 'UVCOP' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 3 Input UV file disk unit #
AIPS 1: IN2NAME ' ' Input CC file name (name)
AIPS 1: IN2CLASS ' ' Input CC file name (class)
AIPS 1: IN2SEQ 0 Input CC file name (seq. #)
AIPS 1: IN2DISK 0 Input CC file disk unit #
AIPS 1: IN2VERS 1 Input CC file version #
AIPS 1: NCOMP 5000 *rest 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: total 25000 CCs maximum
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 1 # clean maps (fields).
AIPS 1: 0 => no model
AIPS 1: >0 => model at samples
AIPS 1: <0 => model smoothly
AIPS 1: Data selection:
AIPS 1: SOURCES *all ' ' Source list
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 229 Lowest channel number 0=>1
AIPS 1: ECHAN 229 Highest channel number
AIPS 1: 0=>BCHAN
AIPS 1: If BCHAN and ECHAN are
AIPS 1: different, then data will be
AIPS 1: averaged across specified
AIPS 1: channel range before plotting
AIPS 1: BIF 2 Lowest IF number 0=>1
AIPS 1: EIF 2 Highest IF number 0=>high
AIPS 1: AVGIF 0 > 0 => average IFs
AIPS 1: DO3COL 0 Plot separate IFs in separate
AIPS 1: colors.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG *all 0 Time: start day,hr,min,sec
AIPS 1: stop day,hr,min,sec.
AIPS 1: STOKES 'RR' Stokes' parameters
AIPS 1: ANTENNAS *all 0 Antennas to be plotted
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: See explanation.
AIPS 1: DOCALIB 2 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 18 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 1 Flag table version
AIPS 1: See explanation.
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=>1.
AIPS 1: -1 => all, but beware!
AIPS 1: DOEBAR 1 If > 0, plot error bars,
AIPS 1: else don't
AIPS 1: SOLINT 0.15 Time over which to average
AIPS 1: data before plotting (mins)
AIPS 1: =0 => no averaging
AIPS 1: >0 SOLINT=MIN(SOLINT, SCAN)
AIPS 1: <0 SOLINT=ABS(SOLINT)
AIPS 1: average through scans
AIPS 1: OPTYPE 'PHAS' 'AUTO' -> autocorrelation
AIPS 1: only, else crosscorrelations
AIPS 1: APARM *all 0 Control parameters
AIPS 1: 1 : > 0 => edit bad
AIPS 1: amplitude points.
AIPS 1: BPARM(2)=0, or 1
AIPS 1: = 0 => do not edit
AIPS 1: bad amplitude points.
AIPS 1: Number of averaged points
AIPS 1: for each baseline has to
AIPS 1: be more than 10.
AIPS 1: 2 : number of sigmas outside
AIPS 1: of which bad points are
AIPS 1: clipped (See HELP); 0=>3.
AIPS 1: 3 : > 0 plot min/max range
AIPS 1: with average
AIPS 1: = 0 do not plot min/max
AIPS 1: lines
AIPS 1: 4 : = 0 min/max over selected
AIPS 1: IFs after averaging
AIPS 1: selected CHs
AIPS 1: > 0 min/max over all
AIPS 1: selected CH/IFs
AIPS 1: 5 : > 0 scalar average
AIPS 1: = 0 vector average
AIPS 1: 6 : used with APARM(1)>0
AIPS 1: >0 flag the bad points
AIPS 1: for all channels
AIPS 1: =0 flag the bad points
AIPS 1: only for the selected
AIPS 1: channels
AIPS 1: 7 : est total plot points
AIPS 1: BPARM 0 2 Control parameters
AIPS 1: *rest 0 1 : X-axis type code
AIPS 1: 2 : Y-axis type code;
AIPS 1: if <0 => AMP & PHASE
AIPS 1: plotted together
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : PHmin (fixed scale)
AIPS 1: 9 : PHmax (fixed scale)
AIPS 1: 10: > 0 -> plot models for
AIPS 1: baselines with no data
AIPS 1: ALIAS *all 0 Antenna alias selection
AIPS 1: If ALIAS(1) is non-zero, any
AIPS 1: antennas matching ALIAS(2-30)
AIPS 1: are treated as if they were
AIPS 1: actually ALIAS(1)
AIPS 1: NPLOTS 11 Max number of plots per page.
AIPS 1: 0 => 3; If bparm(2)<0 =>
AIPS 1: Max number of pairs of plots.
AIPS 1: DOARRAY 0 Array type : 0 = VLBI
AIPS 1: 1 = VLA and ATCA;
AIPS 1: 2 = MERLIN; 3 = WSRT
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: combinations of polzns:
AIPS 1: 'RL/RR', 'RL/LL',
AIPS 1: 'LR/RR', 'LR/LL', 'RR/LL'
AIPS 1: 'LL/RR'; other = don't use
AIPS 1: this option.
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 23, standard types
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 1 Graphics channel 0 => 1.
More information about the Daip
mailing list