[daip] BPASS
Lynn D. Matthews
lmatthew at cfa.harvard.edu
Tue Nov 7 13:35:44 EST 2006
I have just tried running the new BPASS. I find that the real and
imaginary values listed in the generated BP table are all "INDEF",
while all the channel shifts are 0.
My inputs are appended below.
Lynn
AIPS 1: BPASS Task to generate a "Bandpass" (BP) table.
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 User number
AIPS 1: INNAME 'BG118D' Input UV file name (name)
AIPS 1: INCLASS 'SPLAT' Input UV file name (class)
AIPS 1: INSEQ 2 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1:
AIPS 1: Data Selection
AIPS 1: CALSOUR '4C39.25' Bandpass calibrator sources.
AIPS 1: '0528+134' *rest ' '
AIPS 1: QUAL -1 Calibrator qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: UVRANG 0 0 UV range to select
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BIF 1 Lowest IF number 0=>all
AIPS 1: EIF 0 Highest IF number 0=>all
AIPS 1: SUBARRAY 0 Subarray, 0=>all
AIPS 1: ANTENNAS *all 0 Antennas to select
AIPS 1:
AIPS 1: CLEAN map (optional)
AIPS 1: IN2NAME ' ' Cleaned map name (name)
AIPS 1: IN2CLASS ' ' Cleaned map name (class)
AIPS 1: IN2SEQ 0 Cleaned map name (seq. #)
AIPS 1: IN2DISK 0 Cleaned map disk unit #
AIPS 1: INVERS 7 CC file version #.
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 No. Clean map files
AIPS 1: CMETHOD ' ' Modeling method:
AIPS 1: 'DFT','GRID',' '
AIPS 1: SMODEL *all 0 Source model, 1=flux,2=x,3=y
AIPS 1: See HELP SMODEL for details.
AIPS 1:
AIPS 1: Control options
AIPS 1: DOCALIB 2 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 8 CL table to apply (SN table
AIPS 1: to apply to single-source)
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 2 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SOLINT 0 Solution interval (mins)
AIPS 1: -1 => do whole time range
AIPS 1: SOLTYPE ' ' Soln type,' ','L1','GCON',
AIPS 1: 'R', 'L1R', 'GCOR'
AIPS 1: REFANT 9 Reference antenna
AIPS 1: OUTVERS 19 Output BP table version
AIPS 1: 0 => a new table to be
AIPS 1: generated.
AIPS 1: SMOOTH *all 0 Smoothing function.
AIPS 1: BE VERY CAREFUL HERE.
AIPS 1: ANTWT *all 0 Ant. wts (0 => 1.)
AIPS 1: WEIGHTIT 0 Modify data weights function
AIPS 1: MINAMPER 0 Amplitude closure error
AIPS 1: regarded as excessive in %
AIPS 1: MINPHSER 0 Phase closure error regarded
AIPS 1: as excessive in degrees
AIPS 1: BPASSPRM 0 1 Control information:
AIPS 1: 1 1 1: if > 0 use only the
AIPS 1: 1 0 autocorrelation data.
AIPS 1: 0 1 2: print level - see help
AIPS 1: 0 2 3: If > 0 do not divide data
AIPS 1: 0 by source model
AIPS 1: 4: If > 0 store phases only
AIPS 1: in the BP table.
AIPS 1: 5: Divide by 'channel 0'
AIPS 1: **** SEE HELP - NEW ****
AIPS 1: 6: amp closure error limit -
AIPS 1: print channels averaging
AIPS 1: over this if (2) > 0
AIPS 1: 7: phase closure error limit
AIPS 1: print channels averaging
AIPS 1: over this if (2) > 0
AIPS 1: 8: > 0 => scalar average
AIPS 1: 9: > 0 => interpolate over
AIPS 1: flagged channels if poss.
AIPS 1: 10:1 => normalize amplitudes
AIPS 1: using all channels
AIPS 1: 2 => normalize amplitudes
AIPS 1: using ICHANSEL channels
AIPS 1: 3 => normalize amplitudes
AIPS 1: and zero average phase
AIPS 1: using ICHANSEL channels
AIPS 1: 4 => normalize amplitudes
AIPS 1: and zero average phase
AIPS 1: using all channels
AIPS 1: 0 => no deliberate norm.
AIPS 1: 11: > 0 solution weights are
AIPS 1: independent of channel
AIPS 1: = -1 weights scaled
AIPS 1: by amplitude**2
AIPS 1: < -1.5 weights scaled by
AIPS 1: 1 / amplitude**2
AIPS 1: ICHANSEL 10 410 Array of start and stop chan
AIPS 1: 1 *rest 0 numbers, plus a channel
AIPS 1: increment and IF to be used
AIPS 1: to select channels to sum to
AIPS 1: find a 'channel 0'. If all
AIPS 1: 0, range set to inner 75% of
AIPS 1: observing band.
AIPS 1: SPECINDX 0 Spectral index to correct
AIPS 1: 'Channel 0' uv-data
AIPS 1: IN3NAME ' ' Channel 0 uv name (name)
AIPS 1: must be '' to suppress option
AIPS 1: IN3CLASS ' ' Channel 0 uv name (class)
AIPS 1: must be '' to suppress option
AIPS 1: IN3SEQ 0 Channel 0 uv name (seq. #)
AIPS 1: IN3DISK 0 Channel 0 uv disk unit #
AIPS 1: BADDISK *all 0 Disks to avoid for scratch
More information about the Daip
mailing list