[daip] wiper inputs (fwd)
Miller Goss
mgoss at aoc.nrao.edu
Mon Nov 21 15:39:16 EST 2005
---------- Forwarded message ----------
Date: Mon, 21 Nov 2005 13:23:42 -0700 (MST)
From: Miller Goss <mgoss at parkes>
To: daips at parkes
Subject: wiper inputs
IPS 1: Found in Version=NEW
AIPS 1: WIPER Plots and edits data from a u,v data base using TV
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME 'BL132-32TAPA' Input UV file name (name)
AIPS 1: INCLASS 'SUB SP' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 2 Input UV file disk unit #
AIPS 1: SOURCES '3C147' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 0 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 4 1st spectral channel #
AIPS 1: ECHAN 25 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB 2 If >0 calibrate data
AIPS 1: = 2 calibrate weights
AIPS 1: GAINUSE 7 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
# PS 1: DOBAND -1 If >0 apply bandpass
cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 9 : radius of fat wiper
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: REFANT 9 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: IMSIZE 0 0 Size of plot in memory
AIPS 1: DOCENTER 1 Place menu at left (-1),
AIPS 1: center (1), right (0)
AIPS 1: DOALL -1 bit 1 flag all channels
AIPS 1: bit 2 flag all IFs if 1
AIPS 1: bit 3 flag all polarizations
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
>
More information about the Daip
mailing list