[daip] CVEL aborts in TST
Mark Claussen
mclausse at nrao.edu
Tue Nov 8 11:42:09 EST 2005
I am running on megrez, calibrating a VLBA spectral line data
set. I did most of the calibration, then ran BPASS and wanted
to apply the BP table and do the shifts in CVEL. CVEL seemed
quite happy, shifting the source I asked it to and not shifting
the others until it got to the end (Scan 363 is the last scan):
1 3 07-NOV-2005 18:34:37 CVEL Ant: 6 IF#: 1 Average shift = -0.76168
1 3 07-NOV-2005 18:34:37 CVEL Ant: 7 IF#: 1 Average shift = -0.76168
1 3 07-NOV-2005 18:34:37 CVEL Ant: 8 IF#: 1 Average shift = -0.76166
1 3 07-NOV-2005 18:34:37 CVEL Ant: 9 IF#: 1 Average shift = -0.76167
1 3 07-NOV-2005 18:34:37 CVEL Ant: 10 IF#: 1 Average shift = -0.76170
1 3 07-NOV-2005 18:34:45 CVEL Scan 363 Source 3C84 0/ 15 19 23 - 0/ 15 22 38 No shift
1 8 07-NOV-2005 18:34:46 CVEL ZABORS: signal 11 received
1 8 07-NOV-2005 18:34:46 CVEL ABORT!
I tried this twice in TST, changing which CL table was being
used for corrections, with the same result. Decided to try
NEW, which ran through to completion:
1 3 08-NOV-2005 08:33:55 CVEL Ant: 6 IF#: 1 Average shift = -0.76168
1 3 08-NOV-2005 08:33:55 CVEL Ant: 7 IF#: 1 Average shift = -0.76168
1 3 08-NOV-2005 08:33:55 CVEL Ant: 8 IF#: 1 Average shift = -0.76166
1 3 08-NOV-2005 08:33:55 CVEL Ant: 9 IF#: 1 Average shift = -0.76167
1 3 08-NOV-2005 08:33:55 CVEL Ant: 10 IF#: 1 Average shift = -0.76170
1 3 08-NOV-2005 08:34:07 CVEL Scan 363 Source 3C84 0/ 15 19 23 - 0/ 15 22 38 No shift
1 3 08-NOV-2005 08:34:07 CVEL Bandpass table applied - not copied to output
1 3 08-NOV-2005 08:34:07 CVEL Flag table applied - not copied to output
1 3 08-NOV-2005 08:34:07 CVEL If spectral flagging requested, spectra will have
1 3 08-NOV-2005 08:34:07 CVEL been interpolated before shifting
1 3 08-NOV-2005 08:34:08 CVEL Copied CL file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:08 CVEL Copied CL file from vol/cno/vers 2 1 2 to 2 2 2
1 3 08-NOV-2005 08:34:08 CVEL Copied CL file from vol/cno/vers 2 1 3 to 2 2 3
1 3 08-NOV-2005 08:34:09 CVEL Copied CL file from vol/cno/vers 2 1 4 to 2 2 4
1 3 08-NOV-2005 08:34:09 CVEL Copied CL file from vol/cno/vers 2 1 5 to 2 2 5
1 3 08-NOV-2005 08:34:09 CVEL Copied CL file from vol/cno/vers 2 1 6 to 2 2 6
1 3 08-NOV-2005 08:34:09 CVEL Copied NX file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied IM file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied CT file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied MC file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied OB file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied GC file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied WX file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied TY file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied PC file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied AN file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied SU file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied CQ file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:09 CVEL Copied SN file from vol/cno/vers 2 1 1 to 2 2 1
1 3 08-NOV-2005 08:34:10 CVEL Copied SN file from vol/cno/vers 2 1 2 to 2 2 2
1 3 08-NOV-2005 08:34:10 CVEL Copied SN file from vol/cno/vers 2 1 3 to 2 2 3
1 3 08-NOV-2005 08:34:10 CVEL Copied SN file from vol/cno/vers 2 1 4 to 2 2 4
1 3 08-NOV-2005 08:34:10 CVEL Copied SN file from vol/cno/vers 2 1 5 to 2 2 5
1 6 08-NOV-2005 08:34:11 CVEL NX table not copied since some fully flagged data deleted, rerun INDXR
1 3 08-NOV-2005 08:34:11 CVEL Appears to have ended successfully
1 5 08-NOV-2005 08:34:11 CVEL megrez 31DEC04 NEW: Cpu= 1007.5 Real= 1142
As an aside, I noticed that both versions report that
" Velocity definition is OPTICAL" when in fact when I ran
SETJY for the shifted source I set VELDEF = 'RAD' and when I
run PRTAB on the SU table it says that VELDEF = RAD, so I
assume CVEL is lying to me about this.
But what's going on with the TEST version ? Is this another user error ?
Mark
More information about the Daip
mailing list