[daip] calib
Crystal Brogan
cbrogan at ifa.hawaii.edu
Tue May 4 01:41:16 EDT 2004
Can anybody tell me what is wrong with the following? NO
SOLMODE will work.
The uv file is single source, with multiple channels and
subarrays. I'm in Greenbank running 31DEC04
-crystal
AIPS 2: CALIB: Task to determine calibration for data.
AIPS 2: Adverbs Values Comments
AIPS 2: ----------------------------------------------------------------
AIPS 2: Input uv data.
AIPS 2: INNAME 'W51_74AB_P1 ' UV file name (name)
AIPS 2: INCLASS 'CALIB ' UV file name (class)
AIPS 2: INSEQ 1 UV file name (seq. #)
AIPS 2: INDISK 2 UV file disk drive #
AIPS 2: Data selection (multisource):
AIPS 2: CALSOUR *all ' ' Calibrator sources
AIPS 2: QUAL -1 Calibrator qualifier -1=>all
AIPS 2: CALCODE ' ' Calibrator code ' '=>all
AIPS 2: SELBAND -1 Bandwidth to select (kHz)
AIPS 2: SELFREQ -1 Frequency to select (MHz)
AIPS 2: FREQID -1 Freq. ID to select.
AIPS 2: TIMERANG *all 0 Time range to use.
AIPS 2: BCHAN 1 Lowest channel number 0=>all
AIPS 2: ECHAN 0 Highest channel number
AIPS 2: ANTENNAS *all 0 Antennas to select. 0=all
AIPS 2: DOFIT *all 0 Subset of ANTENNAS list for
AIPS 2: which solns are desired. 0
AIPS 2: => all in ANTENNAS, < 0 all
AIPS 2: but those in DOFIT
AIPS 2: ANTUSE *all 0 Mean gain is calculated
AIPS 2: (CPARM(2)>0) using only the
AIPS 2: listed antennas. See explain.
AIPS 2: SUBARRAY 0 Subarray, 0=>all
AIPS 2: UVRANGE 0 0 Range of uv distance for full
AIPS 2: weight
AIPS 2: WTUV 0 Weight outside UVRANGE 0=0.
AIPS 2:
AIPS 2: Cal. info for input:
AIPS 2: DOCALIB -1 If >0 calibrate data
AIPS 2: = 2 calibrate weights
AIPS 2: GAINUSE 0 CL table to apply.
AIPS 2: DOPOL -1 If >0 correct polarization.
AIPS 2: BLVER -1 BL table to apply.
AIPS 2: FLAGVER 5 Flag table version
AIPS 2: DOBAND -1 If >0 apply bandpass cal.
AIPS 2: Method used depends on value
AIPS 2: of DOBAND (see HELP file).
AIPS 2: BPVER -1 Bandpass table version
AIPS 2: SMOOTH *all 0 Smoothing function. See
AIPS 2: HELP SMOOTH for details.
AIPS 2:
AIPS 2: CLEAN map. See HELP.
AIPS 2: IN2NAME 'W51_74AB_P1N' Cleaned map name (name)
AIPS 2: IN2CLASS 'ICL001' Cleaned map name (class)
AIPS 2: IN2SEQ 1 Cleaned map name (seq. #)
AIPS 2: IN2DISK 0 Cleaned map disk unit #
AIPS 2: INVERS 0 CC file version #.
AIPS 2: NCOMP *all 0 # comps to use for model.
AIPS 2: 1 value per field
AIPS 2: FLUX 0 Lowest CC component used.
AIPS 2: NMAPS 89 No. Clean map files
AIPS 2: CMETHOD 'DFT ' Modeling method:
AIPS 2: 'DFT','GRID',' '
AIPS 2: CMODEL ' ' Model type: 'COMP','IMAG'
AIPS 2: SMODEL *all 0 Source model, 1=flux,2=x,3=y
AIPS 2: See HELP SMODEL for models.
AIPS 2:
AIPS 2: Output uv data file.
AIPS 2: OUTNAME 'W51_74AB_AP ' UV file name (name)
AIPS 2: OUTCLASS ' ' UV file name (class)
AIPS 2: OUTSEQ 0 UV file name (seq. #)
AIPS 2: OUTDISK 2 UV file disk drive #
AIPS 2:
AIPS 2: Solution control adverbs:
AIPS 2: REFANT 16 Reference antenna
AIPS 2: SOLINT 1 Solution interval (min)
AIPS 2: SOLSUB 0 Solution subinterval
AIPS 2: SOLMIN 0 Min solution interval
AIPS 2: APARM *all 0 General parameters
AIPS 2: 1=min. no. antennas
AIPS 2: 2 > 0 => data divided
AIPS 2: 3 > 0 => avg. RR,LL
AIPS 2: 5 > 0 => avg. IFs.
AIPS 2: 6=print level, 1=good,
AIPS 2: 2 closure, 3 SNR
AIPS 2: 7=SNR cutoff (0=>5)
AIPS 2: 8=max. ant. # (no AN)
AIPS 2: 9 > 0 => pass failed soln
AIPS 2: Phase-amplitude Parameters:
AIPS 2: SOLTYPE ' ' Soln type,' ','L1','GCON'
AIPS 2: SOLMODE 'A&P ' Soln. mode: 'A&P','P','P!A',
AIPS 2: 'GCON'
AIPS 2: SOLCON 0 Gain constraint factor.
AIPS 2: MINAMPER 0 Amplitude closure error
AIPS 2: regarded as excessive in %
AIPS 2: MINPHSER 0 Phase closure error regarded
AIPS 2: as excessive in degrees
AIPS 2: CPARM *all 0 Phase-amp. parameters
AIPS 2: 1 = Min el for gain
AIPS 2: normalization (deg)
AIPS 2: 2 >0 => normalize gain
AIPS 2: 3 avg. amp. closure err
AIPS 2: 4 avg. ph. closure err
AIPS 2: 5 >0 => scalar average
AIPS 2:
AIPS 2: SNVER 0 Output SN table, 0=>new table
AIPS 2: ANTWT *all 0 Ant. weights (0=>1.0)
AIPS 2: GAINERR *all 0 Std. Dev. of antenna gains.
AIPS 2: BADDISK *all 0 Disk no. not to use for
AIPS 2: scratch files.
>
>go
CALIB2: Task CALIB (release of 31DEC04) begins
CALIB2: CALIB USING W51_74AB_P1 . CALIB . 1 DISK= 2 USID=1984
CALIB2: UNKNOWN SOLUTION MODE =
CALIB2: Purports to die of UNNATURAL causes
CALIB2: thalassa 31DEC04 TST: Cpu= 0.0 Real= 0
AIPS 2: Resumes
More information about the Daip
mailing list