[daip] FILLM difficulties
Amy Mioduszewski
amiodusz at aoc.nrao.edu
Mon Jul 12 16:22:25 EDT 2004
Hi Liz,
Jason referred your problem to me. First off, I know Jason
asked you about this already, are you sure JUNK is an
environmental variable pointing to the correct directory.
Get out of AIPS and do a 'ls $JUNK' and see if the file is
there. You can also try to put the real directory path (if
it is short enough) in INFILE.
Cheers,
Amy
------- Forwarded Message
Return-Path: analysts at aoc.nrao.edu
Delivery-Date: Mon Jul 12 10:06:40 2004
Delivery-Date: Mon, 12 Jul 104 16:06:43 -0700
Return-Path: analysts at aoc.nrao.edu
Received: from aspen.aoc.nrao.edu (aspen [146.88.1.124])
by zia.aoc.nrao.edu (8.12.9/8.12.5) with ESMTP id i6CG6eOS028422
for <amiodusz at zia.aoc.nrao.edu>; Mon, 12 Jul 2004 10:06:40 -0600 (MDT)
Received: (from analysts at localhost)
by aspen.aoc.nrao.edu (8.9.3/8.9.3) id KAA15460
for amiodusz; Mon, 12 Jul 2004 10:06:40 -0600 (MDT)
Date: Mon, 12 Jul 2004 10:06:40 -0600 (MDT)
From: Data Analysts <analysts at aoc.nrao.edu>
Message-Id: <200407121606.KAA15460 at aspen.aoc.nrao.edu>
To: amiodusz at aspen.aoc.nrao.edu
Subject: Re: ah847 may21
X-Sun-Charset: US-ASCII
Hi Amy,
Liz Humphreys is having some problems loading her archive data into AIPS.
She downloaded the data off of the web archive. Below is her Email with
the error she is getting. I asked her to double-check her alias for 'JUNK'
and I guess she still gets the error. Can you help?
Regards,
Jason
- ----- Begin Included Message -----
>From ehumphre at cfa.harvard.edu Mon Jul 12 08:47 MDT 2004
From: Liz Humphreys <ehumphre at cfa.harvard.edu>
To: Data Analysts <analysts at zia.aoc.nrao.edu>
Subject: Re: ah847 may21
Dear Data Analysts,
Following my phone call with Jason, I am sending
you the error message I get trying to load my data
into AIPS using FILLM.
FILLM2: Task FILLM (release of 31DEC04) begins
FILLM2: Shadow flag limit = 2.500E+01 meters.
FILLM2: Opacity correction in CL table weighted average of weather and
FILLM2: season. Weight for weather = 0.50
FILLM2: Gain curve correction in CL table read from file,
FILLM2: with variation as function of antenna and band.
FILLM2: Opening JUNK:AH847_1
FILLM2: ZTPOPN: DISK DEVICE = JUNK:AH847_1 NOT FOUND
FILLM2: FLDKIO: ERROR 2 OPENING FILE
FILLM2: Error 8 opening VLA archive data disk file.
FILLM2: FLMUV: FLMDAT error 8
FILLM2: Read 0 visibilities from 0 files
FILLM2: Appears to have ended successfully
FILLM2: rglinux2 31DEC04 TST: Cpu= 0.0 Real= 0
AIPS 2: Resumes
The inputs I used were these, for a file name AH847_1
AIPS 2: FILLM Task to read a VLA archive tape
AIPS 2: Adverbs Values Comments
AIPS 2: ----------------------------------------------------------------
AIPS 2: INTAPE 1 Tape drive number
AIPS 2: INFILE 'JUNK:AH847_ '
AIPS 2: Non-blank: disk file name
AIPS 2: NFILES 0 Number of files to advance
AIPS 2: Also applies to ON-LINE!
AIPS 2: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 2: QUAL -1 Source qualifier -1=>all
AIPS 2: CALCODE ' ' Calibrator code
AIPS 2: VLAOBS 'AH847 ' VLA obs. pgm. name ('AZ99')
AIPS 2: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 2: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 2: TIMERANG *all 0 Timerange selected
AIPS 2: BCHAN 1 First spectral channel
AIPS 2: ECHAN 0 Highest spectral channel
AIPS 2: OUTNAME 'AH847.040521' Output UV file name (name)
AIPS 2: OUTSEQ 0 Output UV file name (seq. #)
AIPS 2: OUTDISK 1 Output UV file disk unit #.
AIPS 2: DOUVCOMP -1 1 (T) => compressed data
AIPS 2: DOALL 1 1 (T) => write all data.
AIPS 2: DOCONCAT -1 1 (T) => append data to old
AIPS 2: files
AIPS 2: NCOUNT 10 Number of files to read
AIPS 2: DOWEIGHT 1 Use nominal sensitivity to
AIPS 2: scale weights?
AIPS 2: = 10, use Memo 108 weights
AIPS 2: DOACOR -1 Load autocorrelation data?
AIPS 2: CPARM *all 0 User options.
AIPS 2: 1 => Avg. time (seconds)
AIPS 2: 2 => bitmap (see help)
AIPS 2: = 16 for planets & Sun
AIPS 2: 3 => Max. OK IF status
AIPS 2: <=3 => 3
AIPS 2: 4 => Control dropping of
AIPS 2: shadowed data
AIPS 2: < 0 => no shadow check
AIPS 2: 0 => 25 m limit
AIPS 2: > 0 => Shadow limit is
AIPS 2: CPARM(4) in meters
AIPS 2: 5 = channel code (see HELP)
AIPS 2: 6 => Subarray number-see HELP
AIPS 2: 7 => FQ entry tolerance (kHz)
AIPS 2: (see HELP)
AIPS 2: 8 => CL table time incr. min
AIPS 2: 9 => TY table time incr. min
AIPS 2: 10=> Calibrator avg. time
AIPS 2: DPARM *all 0 Selection by Frequency
AIPS 2: 1+2 => A Frequency (Hz)
AIPS 2: 3+4 => B Frequency (Hz)
AIPS 2: 5+6 => C Frequency (Hz)
AIPS 2: 7+8 => D Frequency (Hz)
AIPS 2: 9 => tolerance for A&C
AIPS 2: 10 => tolerance for B&D
AIPS 2: BPARM *all 0 Opacity and Gain curve
AIPS 2: control (see help)
AIPS 2: IN2FILE ' '
AIPS 2: Antenna gains file
Thanks for your help with this.
Regards
Liz
- ----- End Included Message -----
------- End of Forwarded Message
More information about the Daip
mailing list