[daip] Loading an archive file into AIPS with FILLM
Thomas Pannuti
tpannuti at ipac.caltech.edu
Tue Aug 31 15:47:10 EDT 2004
To Whom It May Concern:
I have a quick question to ask about how archived files can
be loaded into AIPS with the FILLM task. The name of the archived
file which I want to load into AIPS is AB628_4 and I have FILLM
set up with the following inputs:
>inp fillm
AIPS 1: FILLM Task to read a VLA archive tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 1 Tape drive number
AIPS 1: INFILE 'AB628_4 '
AIPS 1: Non-blank: disk file name
AIPS 1: NFILES 0 Number of files to advance
AIPS 1: Also applies to ON-LINE!
AIPS 1: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code
AIPS 1: VLAOBS ' ' VLA obs. pgm. name ('AZ99')
AIPS 1: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 1: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: BCHAN 1 First spectral channel
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: OUTNAME 'NGC4395 ' Output UV file name (name)
AIPS 1: OUTSEQ 0 Output UV file name (seq. #)
AIPS 1: OUTDISK 1 Output UV file disk unit #.
AIPS 1: DOUVCOMP 1 1 (T) => compressed data
AIPS 1: DOALL -1 1 (T) => write all data.
AIPS 1: DOCONCAT -1 1 (T) => append data to old
AIPS 1: files
AIPS 1: NCOUNT 0 Number of files to read
AIPS 1: DOWEIGHT 1 Use nominal sensitivity to
AIPS 1: scale weights?
AIPS 1: = 10, use Memo 108 weights
AIPS 1: DOACOR -1 Load autocorrelation data?
AIPS 1: CPARM *all 0 User options.
AIPS 1: 1 => Avg. time (seconds)
AIPS 1: 2 => bitmap (see help)
AIPS 1: = 16 for planets & Sun
AIPS 1: 3 => Max. OK IF status
AIPS 1: <=3 => 3
AIPS 1: 4 => Control dropping of
AIPS 1: shadowed data
AIPS 1: < 0 => no shadow check
AIPS 1: 0 => 25 m limit
AIPS 1: > 0 => Shadow limit is
AIPS 1: CPARM(4) in meters
AIPS 1: 5 = channel code (see HELP)
AIPS 1: 6 => Subarray number-see HELP
AIPS 1: 7 => FQ entry tolerance (kHz)
AIPS 1: (see HELP)
AIPS 1: 8 => CL table time incr. min
AIPS 1: 9 => TY table time incr. min
AIPS 1: 10=> Calibrator avg. time
AIPS 1: DPARM *all 0 Selection by Frequency
AIPS 1: 1+2 => A Frequency (Hz)
AIPS 1: 3+4 => B Frequency (Hz)
AIPS 1: 5+6 => C Frequency (Hz)
AIPS 1: 7+8 => D Frequency (Hz)
AIPS 1: 9 => tolerance for A&C
AIPS 1: 10 => tolerance for B&D
AIPS 1: BPARM *all 0 Opacity and Gain curve
AIPS 1: control (see help)
AIPS 1: IN2FILE ' '
AIPS 1: Antenna gains file
Unfortunately I receive error messages when I try to run this task:
FILLM1: Task FILLM (release of 31DEC04) begins
FILLM1: UV data will be written in compressed format
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening AB628_41
FILLM1: ZTPOPN: DISK DEVICE = AB628_41 NOT FOUND
FILLM1: FLDKIO: ERROR 2 OPENING FILE
FILLM1: Error 8 opening VLA archive data disk file.
FILLM1: FLMUV: FLMDAT error 8
FILLM1: Read 0 visibilities from 0 files
FILLM1: Appears to have ended successfully
FILLM1: sscsci62 31DEC04 TST: Cpu= 0.0 Real= 1
I'm not sure why AIPS cannot load this file: do I have all of the
inputs set correctly? If you have any suggestions about anything that
I should correct, please let me know.
Thanks for your time! Sincerely, Tom Pannuti
More information about the Daip
mailing list