[daip] Fwd: AIPS TV question
Ray S. FURUYA
rsf at astro.caltech.edu
Wed Oct 22 14:43:41 EDT 2003
Hello
I have managed to figure out the problem.
Thanks a lot for the excellent package !
Best regards,
Ray Furuya
>Date: Mon, 20 Oct 2003 16:46:17 -0700
>To: daip at nrao.edu
>From: "Ray S. FURUYA" <rsf at astro.caltech.edu>
>Subject: AIPS TV question
>Cc: rsf at astro.caltech.edu
>
>
>Dear NRAO AIPS team people
>
> My name is Ray Furuya, a postdoc at Caltech Astronomy Department.
> Could you please help me about AIPS TV ? I have installed the newly
>released AIPS (2003-Sep-17) package for RedHat Linux 9.0 with GCC 3.2.2.,
>but, the same as the FAQ, I could not figure out why I did not get TV window.
>Since my notebook pc seems to have 24-bit monitor, I believe that this
>is not the source of my problem.
>
> Below is the relevant information about my environment and what I tried.
>I attached the .AIPSRC file, and related set-up files (I am using .bash).
>Also, I copied and pasted from the AIPS message (I have tried the same
>things with/without network connections, but the results were the same.).
>
> I am afraid that I made some basic mistake, but I greatly appreciate if
>you would be able to help me. Thank you very much in advance.
>
>
>Best regards,
>Ray Furuya
>
>
> *************************************************************
>
>rsf at pueo:~$ m .AIPSRC
># AIPSRC created by install.pl on Fri Oct 17 19:04:36 2003
>#
>AIPS_ROOT = /data/soft/aips
>GROUP = rsf
>GROUPWRITE = YES
>ARCH = LINUX
>SITE = LOCALHOST
>THISHOST = PUEO
>HOSTS = "PUEO"
>PRINTERS = ""
>DATA_AREAS = "/data/soft/aips/DATA/PUEO_1:NONE"
>TAPE_DRIVES = ""
>TPHOSTS = "127.0.0.1"
>APSIZE = 5
>PRINTMED = A
>FORT = /usr/bin/g77
>FORTOPT = -c -fno-automatic -fno-globals -Wno-globals -malign-double
>-Wimplicit -Wall
>CCOM = /usr/bin/gcc
>CCOMOPT = -c -O3 -fomit-frame-pointer -funroll-loops
>-I/data/soft/aips/31DEC03/INC -D_FILE_O
>FFSET_BITS=64 -DHAVE_LINUX_GLIBC
>LINK = /usr/bin/g77
>READLINE = /usr/lib/libreadline.a
>DOTWOLIB = NO
>DOWNLOADED = 2003.10.18:01:58.21
>UNPACKED = Unpacked in /data/soft/aips at Fri Oct 17 18:58:35 2003
>
>
>#---- End of AIPSRC file
>
>
>
>
> *************************************************************
>
>
>less /etc/services
>rsf at pueo:~/aips_test$
># Local services
># For 31Dec03 AIPS ---------------------------------------------
>sssin 5000/tcp SSSIN # AIPS TV server
>ssslock 5002/tcp SSSLOCK # AIPS TV Lock
>msgserv 5008/tcp MSGSERV # AIPS Message Server
>tekserv 5009/tcp TEKSERV # AIPS TekServer
>aipsmt0 5010/tcp AIPSMT0 # AIPS remote FITS disk access
>aipsmt1 5011/tcp AIPSMT1 # AIPS remote tape 1
>aipsmt2 5012/tcp AIPSMT2 # AIPS remote tape 2
>aipsmt3 5013/tcp AIPSMT3
>aipsmt4 5014/tcp AIPSMT4
>aipsmt5 5015/tcp AIPSMT5
>aipsmt6 5016/tcp AIPSMT6
>aipsmt7 5017/tcp AIPSMT7
># ----------- AIPS 31Dec03 till here ---------------------------
>
>
>
>
> *************************************************************
>
>
>
>screen #0:
> dimensions: 1600x1200 pixels (330x210 millimeters)
> resolution: 123x145 dots per inch
> depths (7): 24, 1, 4, 8, 15, 16, 32
> root window id: 0xb5
> depth of root window: 24 planes
> number of colormaps: minimum 1, maximum 1
> default colormap: 0x20
> default number of colormap cells: 256
> preallocated pixels: black 0, white 16777215
> options: backing-store NO, save-unders NO
> largest cursor: 64x64
> current input event mask: 0xda4031
> KeyPressMask EnterWindowMask LeaveWindowMask
> KeymapStateMask StructureNotifyMask SubstructureNotifyMask
> SubstructureRedirectMask PropertyChangeMask ColormapChangeMask
> number of visuals: 40
> default visual id: 0x21
> visual:
> visual id: 0x21
> class: TrueColor
> depth: 24 planes
> available colormap entries: 256 per subfield
> red, green, blue masks: 0xff0000, 0xff00, 0xff
> significant bits in color specification: 8 bits
>
>
>
> *************************************************************
>
>
>rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips notv
>START_AIPS: Your initial AIPS printer is the
>START_AIPS: - system name , AIPS type
>
>
>START_AIPS: User data area assignments:
> (Using global default file /data/soft/aips/DA00/DADEVS.LIST)
> Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
>
>
>Tape assignments:
> Tape 1 is REMOTE
> Tape 2 is REMOTE
>
>
>START_AIPS: Starting TPMON daemons on PUEO asynchronously...
>Starting up 31DEC03 AIPS with normal priority
>Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
>AIPS 1: You are NOT assigned a TV device or server
>AIPS 1: You are NOT assigned a graphics device or server
>AIPS 1: Enter user ID number
>?
>
>
>
> *************************************************************
>
>
>rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=local
>START_AIPS: Will use or start first available Unix Socket based TV
>START_AIPS: Your initial AIPS printer is the
>START_AIPS: - system name , AIPS type
>
>
>START_AIPS: User data area assignments:
> (Using global default file /data/soft/aips/DA00/DADEVS.LIST)
> Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
>
>
>Tape assignments:
> Tape 1 is REMOTE
> Tape 2 is REMOTE
>
>
>START_AIPS: I am GUESSING you are at a workstation called pueo
>START_AIPS: - but have chosen to run the TV locally on PUEO
>START_AIPS: Starting TV servers on pueo asynchronously
>START_AIPS: - WITH Unix Sockets as requested...
>START_AIPS: Starting TPMON daemons on PUEO asynchronously...
>Starting up 31DEC03 AIPS with normal priority
>Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
>AIPS 1: You are not on a local TV device, welcome stranger
>AIPS 1: You are assigned TV device/server 3
>AIPS 1: You are assigned graphics device/server 3
>AIPS 1: Enter user ID number
>?UNIXSERVERS: TVSRV1 is already running on host pueo, user rsf
>UNIXSERVERS: Start XAS1 on pueo, DISPLAY pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>XAS: cannot connect to X server pueo:0
>UNIXSERVERS: Start graphics server TKSRV1 on pueo, display pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>xterm Xt error: Can't open display: pueo:0
>UNIXSERVERS: Start message server MSSRV1 on pueo, display pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>xterm Xt error: Can't open display: pueo:0
>
>
>AIPS 1: Enter user ID number
>?106
>AIPS 1: 31DEC03 AIPS:
>AIPS 1: Copyright (C) 1995-2003 Associated Universities, Inc.
>AIPS 1: AIPS comes with ABSOLUTELY NO WARRANTY;
>AIPS 1: for details, type HELP GNUGPL
>AIPS 1: This is free software, and you are welcome to redistribute it
>AIPS 1: under certain conditions; type EXPLAIN GNUGPL for details.
>AIPS 1: Previous session command-line history recovered.
>AIPS 1: TAB-key completions enabled, type HELP READLINE for details.
>AIPS 1: Recovered POPS environment from last exit
> >tvin
>ZSSSO2 connect (UNIX): No such file or directory
>AIPS 1: ZSSSOP: CHANNEL ASSIGN ERROR FOR LUN 9
>AIPS 1: YTVOPN: TV OPEN ERROR 6
>AIPS 1: TV OPEN ERROR 6
> >
>
>
> *************************************************************
>
>
>rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips
>tv=disp:localhost
>START_AIPS: Your initial AIPS printer is the
>START_AIPS: - system name , AIPS type
>
>
>START_AIPS: User data area assignments:
> (Using global default file /data/soft/aips/DA00/DADEVS.LIST)
> Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
>
>
>Tape assignments:
> Tape 1 is REMOTE
> Tape 2 is REMOTE
>
>
>START_AIPS: Checking if localhost is reachable via ssh -n...
>
>
>START_AIPS: Cannot start remote TV servers on localhost, sorry!
>START_AIPS: remote command gave this error:
>
>
>ssh_exchange_identification: Connection closed by remote host
>START_AIPS: check your secure shell setup, in particular
>START_AIPS: whether you have a passphrase enabled. You may
>START_AIPS: wish to try 'ssh -n -v localhost pwd' to see
>START_AIPS: what the problem is.
>START_AIPS: Starting TPMON daemons on PUEO asynchronously...
>Starting up 31DEC03 AIPS with normal priority
>Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
>AIPS 1: You are assigned TV device/server 2
>AIPS 1: You are assigned graphics device/server 2
>AIPS 1: Enter user ID number
>?
>
>
>rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=disp:peuo
>START_AIPS: Your initial AIPS printer is the
>START_AIPS: - system name , AIPS type
>
>
>START_AIPS: User data area assignments:
> (Using global default file /data/soft/aips/DA00/DADEVS.LIST)
> Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
>
>
>Tape assignments:
> Tape 1 is REMOTE
> Tape 2 is REMOTE
>
>
>TVDEVS.SH: Unrecognized TVHOST; peuo
>START_AIPS: Checking if peuo is reachable via ssh -n...
>START_AIPS: Cannot start remote TV servers on peuo, sorry!
>START_AIPS: remote command gave this error:
>ssh: peuo: Name or service not known
>START_AIPS: check your secure shell setup, in particular
>START_AIPS: whether you have a passphrase enabled. You may
>START_AIPS: wish to try 'ssh -n -v peuo pwd' to see
>START_AIPS: what the problem is.
>START_AIPS: Starting TPMON daemons on PUEO asynchronously...
>Starting up 31DEC03 AIPS with normal priority
>Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
>AIPS 1: You are not on a local TV device, welcome stranger
>AIPS 1: You are assigned TV device/server 3
>AIPS 1: You are assigned graphics device/server 3
>AIPS 1: Enter user ID number
>?
>
>
>rsf at pueo:/data/soft/aips$ ssh -n -v peuo pwd
>OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090701f
>debug1: Reading configuration data /etc/ssh/ssh_config
>debug1: Applying options for *
>debug1: Rhosts Authentication disabled, originating port will not be trusted.
>debug1: ssh_connect: needpriv 0
>ssh: peuo: Name or service not known
>
>
>
> *************************************************************
>
>
>rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=local:pueo
>START_AIPS: Will use or start first available Unix Socket based TV
>START_AIPS: Your initial AIPS printer is the
>START_AIPS: - system name , AIPS type
>
>
>START_AIPS: User data area assignments:
> (Using global default file /data/soft/aips/DA00/DADEVS.LIST)
> Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
>
>
>Tape assignments:
> Tape 1 is REMOTE
> Tape 2 is REMOTE
>
>
>START_AIPS: I am GUESSING you are at a workstation called pueo
>START_AIPS: - but have chosen to run the TV locally on PUEO
>START_AIPS: Starting TV servers on pueo asynchronously
>START_AIPS: - WITH Unix Sockets as requested...
>START_AIPS: Starting TPMON daemons on PUEO asynchronously...
>Starting up 31DEC03 AIPS with normal priority
>Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
>AIPS 1: You are not on a local TV device, welcome stranger
>AIPS 1: You are assigned TV device/server 3
>AIPS 1: You are assigned graphics device/server 3
>AIPS 1: Enter user ID number
>?UNIXSERVERS: TVSRV1 is already running on host pueo, user rsf
>UNIXSERVERS: Start XAS1 on pueo, DISPLAY pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>XAS: cannot connect to X server pueo:0
>UNIXSERVERS: Start graphics server TKSRV1 on pueo, display pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>xterm Xt error: Can't open display: pueo:0
>UNIXSERVERS: Start message server MSSRV1 on pueo, display pueo:0
>_X11TransSocketINETConnect: Can't get address for pueo
>xterm Xt error: Can't open display: pueo:0
>
>
>AIPS 1: Enter user ID number
>?
=============================================
Ray S. FURUYA rsf at astro.caltech.edu
Radio Astronomy, MS 105-24,
California Institute of Technology,
Pasadena, CA 91125, U.S.A.
Phone +1-(626) 395-2587; Fax +1-(626) 568-9352
==============================================
More information about the Daip
mailing list