[daip] AIPS TV question
Ray S. FURUYA
rsf at astro.caltech.edu
Mon Oct 20 19:46:17 EDT 2003
Dear NRAO AIPS team people
My name is Ray Furuya, a postdoc at Caltech Astronomy Department.
Could you please help me about AIPS TV ? I have installed the newly
released AIPS (2003-Sep-17) package for RedHat Linux 9.0 with GCC 3.2.2.,
but, the same as the FAQ, I could not figure out why I did not get TV window.
Since my notebook pc seems to have 24-bit monitor, I believe that this
is not the source of my problem.
Below is the relevant information about my environment and what I tried.
I attached the .AIPSRC file, and related set-up files (I am using .bash).
Also, I copied and pasted from the AIPS message (I have tried the same
things with/without network connections, but the results were the same.).
I am afraid that I made some basic mistake, but I greatly appreciate if
you would be able to help me. Thank you very much in advance.
Best regards,
Ray Furuya
*************************************************************
rsf at pueo:~$ m .AIPSRC
# AIPSRC created by install.pl on Fri Oct 17 19:04:36 2003
#
AIPS_ROOT = /data/soft/aips
GROUP = rsf
GROUPWRITE = YES
ARCH = LINUX
SITE = LOCALHOST
THISHOST = PUEO
HOSTS = "PUEO"
PRINTERS = ""
DATA_AREAS = "/data/soft/aips/DATA/PUEO_1:NONE"
TAPE_DRIVES = ""
TPHOSTS = "127.0.0.1"
APSIZE = 5
PRINTMED = A
FORT = /usr/bin/g77
FORTOPT = -c -fno-automatic -fno-globals -Wno-globals -malign-double
-Wimplicit -Wall
CCOM = /usr/bin/gcc
CCOMOPT = -c -O3 -fomit-frame-pointer -funroll-loops
-I/data/soft/aips/31DEC03/INC -D_FILE_O
FFSET_BITS=64 -DHAVE_LINUX_GLIBC
LINK = /usr/bin/g77
READLINE = /usr/lib/libreadline.a
DOTWOLIB = NO
DOWNLOADED = 2003.10.18:01:58.21
UNPACKED = Unpacked in /data/soft/aips at Fri Oct 17 18:58:35 2003
#---- End of AIPSRC file
*************************************************************
less /etc/services
rsf at pueo:~/aips_test$
# Local services
# For 31Dec03 AIPS ---------------------------------------------
sssin 5000/tcp SSSIN # AIPS TV server
ssslock 5002/tcp SSSLOCK # AIPS TV Lock
msgserv 5008/tcp MSGSERV # AIPS Message Server
tekserv 5009/tcp TEKSERV # AIPS TekServer
aipsmt0 5010/tcp AIPSMT0 # AIPS remote FITS disk access
aipsmt1 5011/tcp AIPSMT1 # AIPS remote tape 1
aipsmt2 5012/tcp AIPSMT2 # AIPS remote tape 2
aipsmt3 5013/tcp AIPSMT3
aipsmt4 5014/tcp AIPSMT4
aipsmt5 5015/tcp AIPSMT5
aipsmt6 5016/tcp AIPSMT6
aipsmt7 5017/tcp AIPSMT7
# ----------- AIPS 31Dec03 till here ---------------------------
*************************************************************
screen #0:
dimensions: 1600x1200 pixels (330x210 millimeters)
resolution: 123x145 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0xb5
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store NO, save-unders NO
largest cursor: 64x64
current input event mask: 0xda4031
KeyPressMask EnterWindowMask LeaveWindowMask
KeymapStateMask StructureNotifyMask SubstructureNotifyMask
SubstructureRedirectMask PropertyChangeMask ColormapChangeMask
number of visuals: 40
default visual id: 0x21
visual:
visual id: 0x21
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
*************************************************************
rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips notv
START_AIPS: Your initial AIPS printer is the
START_AIPS: - system name , AIPS type
START_AIPS: User data area assignments:
(Using global default file /data/soft/aips/DA00/DADEVS.LIST)
Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: Starting TPMON daemons on PUEO asynchronously...
Starting up 31DEC03 AIPS with normal priority
Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
AIPS 1: You are NOT assigned a TV device or server
AIPS 1: You are NOT assigned a graphics device or server
AIPS 1: Enter user ID number
?
*************************************************************
rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=local
START_AIPS: Will use or start first available Unix Socket based TV
START_AIPS: Your initial AIPS printer is the
START_AIPS: - system name , AIPS type
START_AIPS: User data area assignments:
(Using global default file /data/soft/aips/DA00/DADEVS.LIST)
Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: I am GUESSING you are at a workstation called pueo
START_AIPS: - but have chosen to run the TV locally on PUEO
START_AIPS: Starting TV servers on pueo asynchronously
START_AIPS: - WITH Unix Sockets as requested...
START_AIPS: Starting TPMON daemons on PUEO asynchronously...
Starting up 31DEC03 AIPS with normal priority
Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
AIPS 1: You are not on a local TV device, welcome stranger
AIPS 1: You are assigned TV device/server 3
AIPS 1: You are assigned graphics device/server 3
AIPS 1: Enter user ID number
?UNIXSERVERS: TVSRV1 is already running on host pueo, user rsf
UNIXSERVERS: Start XAS1 on pueo, DISPLAY pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
XAS: cannot connect to X server pueo:0
UNIXSERVERS: Start graphics server TKSRV1 on pueo, display pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
xterm Xt error: Can't open display: pueo:0
UNIXSERVERS: Start message server MSSRV1 on pueo, display pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
xterm Xt error: Can't open display: pueo:0
AIPS 1: Enter user ID number
?106
AIPS 1: 31DEC03 AIPS:
AIPS 1: Copyright (C) 1995-2003 Associated Universities, Inc.
AIPS 1: AIPS comes with ABSOLUTELY NO WARRANTY;
AIPS 1: for details, type HELP GNUGPL
AIPS 1: This is free software, and you are welcome to redistribute it
AIPS 1: under certain conditions; type EXPLAIN GNUGPL for details.
AIPS 1: Previous session command-line history recovered.
AIPS 1: TAB-key completions enabled, type HELP READLINE for details.
AIPS 1: Recovered POPS environment from last exit
>tvin
ZSSSO2 connect (UNIX): No such file or directory
AIPS 1: ZSSSOP: CHANNEL ASSIGN ERROR FOR LUN 9
AIPS 1: YTVOPN: TV OPEN ERROR 6
AIPS 1: TV OPEN ERROR 6
>
*************************************************************
rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=disp:localhost
START_AIPS: Your initial AIPS printer is the
START_AIPS: - system name , AIPS type
START_AIPS: User data area assignments:
(Using global default file /data/soft/aips/DA00/DADEVS.LIST)
Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: Checking if localhost is reachable via ssh -n...
START_AIPS: Cannot start remote TV servers on localhost, sorry!
START_AIPS: remote command gave this error:
ssh_exchange_identification: Connection closed by remote host
START_AIPS: check your secure shell setup, in particular
START_AIPS: whether you have a passphrase enabled. You may
START_AIPS: wish to try 'ssh -n -v localhost pwd' to see
START_AIPS: what the problem is.
START_AIPS: Starting TPMON daemons on PUEO asynchronously...
Starting up 31DEC03 AIPS with normal priority
Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
AIPS 1: You are assigned TV device/server 2
AIPS 1: You are assigned graphics device/server 2
AIPS 1: Enter user ID number
?
rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=disp:peuo
START_AIPS: Your initial AIPS printer is the
START_AIPS: - system name , AIPS type
START_AIPS: User data area assignments:
(Using global default file /data/soft/aips/DA00/DADEVS.LIST)
Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
TVDEVS.SH: Unrecognized TVHOST; peuo
START_AIPS: Checking if peuo is reachable via ssh -n...
START_AIPS: Cannot start remote TV servers on peuo, sorry!
START_AIPS: remote command gave this error:
ssh: peuo: Name or service not known
START_AIPS: check your secure shell setup, in particular
START_AIPS: whether you have a passphrase enabled. You may
START_AIPS: wish to try 'ssh -n -v peuo pwd' to see
START_AIPS: what the problem is.
START_AIPS: Starting TPMON daemons on PUEO asynchronously...
Starting up 31DEC03 AIPS with normal priority
Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
AIPS 1: You are not on a local TV device, welcome stranger
AIPS 1: You are assigned TV device/server 3
AIPS 1: You are assigned graphics device/server 3
AIPS 1: Enter user ID number
?
rsf at pueo:/data/soft/aips$ ssh -n -v peuo pwd
OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090701f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
ssh: peuo: Name or service not known
*************************************************************
rsf at pueo:/data/soft/aips/31DEC03/LINUX/SYSTEM/LOCALHOST$ ./aips tv=local:pueo
START_AIPS: Will use or start first available Unix Socket based TV
START_AIPS: Your initial AIPS printer is the
START_AIPS: - system name , AIPS type
START_AIPS: User data area assignments:
(Using global default file /data/soft/aips/DA00/DADEVS.LIST)
Disk 1 (1) is /data/soft/aips/DATA/PUEO_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: I am GUESSING you are at a workstation called pueo
START_AIPS: - but have chosen to run the TV locally on PUEO
START_AIPS: Starting TV servers on pueo asynchronously
START_AIPS: - WITH Unix Sockets as requested...
START_AIPS: Starting TPMON daemons on PUEO asynchronously...
Starting up 31DEC03 AIPS with normal priority
Begin the one true AIPS number 1 (release of 31DEC03) at priority = 0
AIPS 1: You are not on a local TV device, welcome stranger
AIPS 1: You are assigned TV device/server 3
AIPS 1: You are assigned graphics device/server 3
AIPS 1: Enter user ID number
?UNIXSERVERS: TVSRV1 is already running on host pueo, user rsf
UNIXSERVERS: Start XAS1 on pueo, DISPLAY pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
XAS: cannot connect to X server pueo:0
UNIXSERVERS: Start graphics server TKSRV1 on pueo, display pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
xterm Xt error: Can't open display: pueo:0
UNIXSERVERS: Start message server MSSRV1 on pueo, display pueo:0
_X11TransSocketINETConnect: Can't get address for pueo
xterm Xt error: Can't open display: pueo:0
AIPS 1: Enter user ID number
?
=============================================
Ray S. FURUYA rsf at astro.caltech.edu
Radio Astronomy, MS 105-24,
California Institute of Technology,
Pasadena, CA 91125, U.S.A.
Phone +1-(626) 395-2587; Fax +1-(626) 568-9352
==============================================
More information about the Daip
mailing list