[daip] ltype 4 in greys
Craig Walker
cwalker at aoc.nrao.edu
Tue May 6 19:36:56 EDT 2003
ltype 4 in GREYS gave me absolute positions (same as ltype 3 except that
the declination label was much closer to the plot) rather
than relative. CNTR is ok. Here are the inputs for user 450 on eolus:
>inp
AIPS 1: GREYS: Task to do grey-scale plot with optional contours.
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: DOCONT 1 > 0 => do contours
AIPS 1: DOCOLOR 0 Plot image(s) as true color
AIPS 1: INNAME '3C120_CH2HST' Grey scale image name
AIPS 1: INCLASS 'MATHSS' Grey scale image class
AIPS 1: INSEQ 1 Grey scale image seq. #
AIPS 1: INDISK 1 Grey scale disk drive #
AIPS 1: IN2NAME '3C120 VM LSS' Contour image name
AIPS 1: IN2CLASS 'I 100 ' Contour image class
AIPS 1: IN2SEQ 1 Contour image seq. #
AIPS 1: IN2DISK 1 Contour image disk drive #
AIPS 1: IN3NAME ' ' Green image name
AIPS 1: IN3CLASS ' ' Green image class
AIPS 1: IN3SEQ 1 Green image seq. #
AIPS 1: IN3DISK 0 Green image disk drive #
AIPS 1: IN4NAME ' ' Blue image name
AIPS 1: IN4CLASS ' ' Blue image class
AIPS 1: IN4SEQ 0 Blue image seq. #
AIPS 1: IN4DISK 0 Blue image disk drive #
AIPS 1: BLC 38 17 Bottom left corner of image
AIPS 1: 1 1 0=>entire image
AIPS 1: 1 1 1
AIPS 1: TRC 203 122 Top right corner of image
AIPS 1: 1 1 0=>entire image. See HELP!
AIPS 1: 1 1 1
AIPS 1: XYRATIO 0 X to Y axis plot ratio. 0 =>
AIPS 1: header inc or window ratio.
AIPS 1: PIXRANGE 0.7 1.5 Min,Max of image intensity
AIPS 1: 0 => entire range.
AIPS 1: FUNCTYPE ' ' Image intensity transfer func
AIPS 1: 'LN' Linear. unknown=>'LN'
AIPS 1: 'LG' Logarithmic
AIPS 1: 'SQ' Square root
AIPS 1: 'NE' Negative linear
AIPS 1: 'NG' Negative logarithmic
AIPS 1: 'NQ' Negative square root
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: APARM *all 0 1,2 pixrange of green image
AIPS 1: 3,4 pixrange of red image
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 standard, 4 rel
AIPS 1: to center, 5 rel to subim cen
AIPS 1: 6 pixels, 7-10 as 3-6 with
AIPS 1: only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOALIGN -1 > 0 => images must line up
AIPS 1: (see HELP DOALIGN)
AIPS 1: PLEV 0 Percent of peak for levs.
AIPS 1: CLEV 0.003 Absolute value for levs
AIPS 1: (used only if PLEV = 0).
AIPS 1: LEVS -4 -2 Contour levels (up to 30).
AIPS 1: -1 1 2 4
AIPS 1: 8 16 32 64
AIPS 1: 128 256 512 1024
AIPS 1: 2048 4096 8192 16384
AIPS 1: 32768 65536 *rest 0
AIPS 1: DOWEDGE -1 > 0 => plot a wedge also.
AIPS 1: = 2 => put on the right edge.
AIPS 1: = 3 => put on top using full
AIPS 1: range of image values
AIPS 1: = 4 => put on right w full
AIPS 1: range of image values
AIPS 1: DOCIRCLE -1 > 0 => extend ticks to form
AIPS 1: coordinate grid
AIPS 1: INVERS 0 STar file version number.
AIPS 1: STFACTOR 0 Scale star sizes: 0 => none.
AIPS 1: > 0 crosses with no labels
AIPS 1: < 0 crosses with labels
AIPS 1: IN2VERS 0 Start slice to overlay
AIPS 1: IN3VERS 0 End slice to overlay
AIPS 1: NBOXES 0 Number of boxes to overlay
AIPS 1: CLBOX *all 0 Boxes to overlay
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: TVCHAN 1 Grey-scale display channel
AIPS 1: DODARK 1 Plot dark vectors as black?
AIPS 1: DARKLINE 0.33 Switch to dark lines when
AIPS 1: grey-scale > DARKLINE 0-1
AIPS 1: TVCORN 0 0 TV pixel location of bottom
AIPS 1: left corner of image
AIPS 1: 0 => centered
AIPS 1: OFMFILE ' '
AIPS 1: ' ' => do black & white
AIPS 1: 'TV' => use TV OFM
AIPS 1: else read file for OFM
---------------------------------------------------------------------
R. Craig Walker Array Operations Center
cwalker at nrao.edu National Radio Astronomy Observatory
Phone 505 835 7247 P. O. Box O
Fax 505 835 7027 Socorro NM 87801 USA
---------------------------------------------------------------------
More information about the Daip
mailing list