[daip] running fillm on archive disk file
Min S. Yun
myun at bonito.astro.umass.edu
Fri Dec 19 16:09:31 EST 2003
For the first time, I am trying to read in the VLA archive data file
directly into aips. I have 31DEC03 version aips running on my
machine, and the archive data file was retrieved today (observed
2 days ago). This should work, right? Somehow FILLM does not
find my data. Here are my inputs:
AIPS 1: FILLM Task to read a VLA archive tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 1 Tape drive number
AIPS 1: INFILE 'XX:AY146_ '
AIPS 1: Non-blank: disk file name
AIPS 1: NFILES 0 Number of files to advance
AIPS 1: Also applies to ON-LINE!
AIPS 1: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code
AIPS 1: VLAOBS 'AY146 ' VLA obs. pgm. name ('AZ99')
AIPS 1: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 1: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: BCHAN 1 First spectral channel
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: OUTNAME ' ' Output UV file name (name)
AIPS 1: OUTSEQ 1 Output UV file name (seq. #)
AIPS 1: OUTDISK 5 Output UV file disk unit #.
AIPS 1: DOUVCOMP 1 1 (T) => compressed data
AIPS 1: DOALL -1 1 (T) => write all data.
AIPS 1: DOCONCAT -1 1 (T) => append data to old
AIPS 1: files
AIPS 1: NCOUNT 1 Number of files to read
AIPS 1: DOWEIGHT 10 Use nominal sensitivity to
AIPS 1: scale weights?
AIPS 1: = 10, use Memo 108 weights
AIPS 1: DOACOR -1 Load autocorrelation data?
AIPS 1: CPARM *all 0 User options.
AIPS 1: 1 => Avg. time (seconds)
AIPS 1: 2 => bitmap (see help)
AIPS 1: = 16 for planets & Sun
AIPS 1: 3 => Max. OK IF status
AIPS 1: <=3 => 3
AIPS 1: 4 => Control dropping of
AIPS 1: shadowed data
AIPS 1: < 0 => no shadow check
AIPS 1: 0 => 25 m limit
AIPS 1: > 0 => Shadow limit is
AIPS 1: CPARM(4) in meters
AIPS 1: 5 = channel code (see HELP)
AIPS 1: 6 => Subarray number-see HELP
AIPS 1: 7 => FQ entry tolerance (kHz)
AIPS 1: (see HELP)
AIPS 1: 8 => CL table time incr. min
AIPS 1: 9 => TY table time incr. min
AIPS 1: 10=> Calibrator avg. time
AIPS 1: DPARM *all 0 Selection by Frequency
AIPS 1: 1+2 => A Frequency (Hz)
AIPS 1: 3+4 => B Frequency (Hz)
AIPS 1: 5+6 => C Frequency (Hz)
AIPS 1: 7+8 => D Frequency (Hz)
AIPS 1: 9 => tolerance for A&C
AIPS 1: 10 => tolerance for B&D
AIPS 1: BPARM *all 0 Opacity and Gain curve
AIPS 1: control (see help)
AIPS 1: IN2FILE ' '
AIPS 1: Antenna gains file
When I run this, nothing gets written:
bonito> FILLM1: Task FILLM (release of 31DEC03) begins
bonito> FILLM1: UV data will be written in compressed format
bonito> FILLM1: Shadow flag limit = 2.500E+01 meters.
bonito> FILLM1: Opacity correction in CL table weighted average of weather
and
bonito> FILLM1: season. Weight for weather = 0.50
bonito> FILLM1: Gain curve correction in CL table read from file,
bonito> FILLM1: with variation as function of antenna and band.
bonito> FILLM1: Opening XX:AY146_1
bonito> FILLM1: Skipping data at 0/04:00:00
bonito> FILLM1: tape file # 1, start date/time = 20031218/04:27:50
bonito> FILLM1: Skipping data at 0/05:00:00
bonito> FILLM1: Skipping data at 0/06:00:00
bonito> FILLM1: Skipping data at 0/07:00:00
bonito> FILLM1: Skipping data at 0/08:00:00
bonito> FILLM1: Skipping data at 0/09:00:00
bonito> FILLM1: Skipping data at 0/10:00:00
bonito> FILLM1: Skipping data at 0/11:00:00
bonito> FILLM1: Skipping data at 0/12:00:00
bonito> FILLM1: Skipping data at 0/13:00:00
bonito> FILLM1: No data found meeting selection criteria!
bonito> FILLM1: Read 0 visibilities from 1 files
bonito> FILLM1: Appears to have ended successfully
bonito> FILLM1: bonito 31DEC03 TST: Cpu= 0.5 Real= 1
I must be not specifying some parameter in FILLM. What am I
doing wrong? HELP!!
-- Min
More information about the Daip
mailing list