[daip] KNTR
Ian Pattison
ip at ast.leeds.ac.uk
Tue Dec 16 10:21:56 EST 2003
Hi,
I'm trying to overlay the contours from a radio map, on a grey scale image
of the same source, taken in the near-IR. The near-IR image was first
converted from sdf (ndf) to fits format then loaded using FITLD.
I tried using KNTR but get the error:
>KNTR 1: INPUT MAPS ARE NOT COINCIDENT: AXIS 1
The two headers are (radio then IR):
AIPS 1: Image=M33 (MA) Filename=6(6) .MA . 1
AIPS 1: Telescope=VLA Receiver=VLA
AIPS 1: Observer=AH768 User #= 60
AIPS 1: Observ. date=28-JAN-2002 Map date=05-DEC-2002
AIPS 1: Minimum=-1.11503970E-04 Maximum= 2.03197147E-03 JY/BEAM
AIPS 1: ----------------------------------------------------------------
AIPS 1: Type Pixels Coord value at Pixel Coord incr Rotat
AIPS 1: RA---SIN 61 01 34 11.170 -1591.00 -0.087150 0.00
AIPS 1: DEC--SIN 61 30 40 55.700 124.00 0.087150 0.00
AIPS 1: FREQ 1 4.8601000E+09 1.00 4.3750000E+07 0.00
AIPS 1: STOKES 1 1.0000000E+00 1.00 1.0000000E+00 0.00
AIPS 1: ----------------------------------------------------------------
AIPS 1: Coordinate equinox 2000.00
AIPS 1: Map type=NORMAL Number of iterations= 93
AIPS 1: Conv size= 0.46453 X 0.44500 Position angle= 3.67
AIPS 1: Observed RA 01 33 50.500 DEC 30 38 21.80
AIPS 1: Phase shifted in X 310.050 in Y 153.900
AIPS 1: Rest freq 0.000 Vel type: OPTICAL wrt YOU
AIPS 1: Alt ref. value 1.12500E+05 wrt pixel 1.00
and,
AIPS 1: Image=Output f (MA) Filename=Output f .IMAP . 1
AIPS 1: Telescope=UKIRT Receiver=UFTI
AIPS 1: Observer=hoarem User #= 60
AIPS 1: Observ. date=BAD DATE Map date=15-DEC-2003
AIPS 1: Pixel type: FLOATING Magic value blanking
AIPS 1: Minimum=-3.40282326E+38 Maximum= 7.89022156E+02
AIPS 1: ----------------------------------------------------------------
AIPS 1: Type Pixels Coord value at Pixel Coord incr Rotat
AIPS 1: RA---TAN 1144 01 34 00.264 571.83 -0.091284 0.00
AIPS 1: DEC--TAN 1144 30 40 35.400 571.68 0.092453 0.99
AIPS 1: ----------------------------------------------------------------
AIPS 1: Coordinate equinox 2000.00
I did notice that the RA and DEC are in TAN projection, so I thought this
could be the problem, and so I converted the data to SIN projection using
REGRD. However I get the same message, when DOALIGN in KNTR is set to 1,
i.e. asking to align images.
Any suggestions as to what I'm doing wrong?
Many Thanks,
Ian Pattison
--
******************************************
Ian Pattison
Astrophysics Group
School of Physics & Astronomy
University of Leeds
LS2 9JT
United Kingdom
Tel: +44 (0)113 3433872
email: ip at ast.leeds.ac.uk
WWW: http://ast.leeds.ac.uk/~ip
******************************************
More information about the Daip
mailing list