[daip] POSSM data
Lorant Sjouwerman, NRAO
lsjouwer at aoc.nrao.edu
Mon Oct 21 11:32:46 EDT 2002
Leonia,
Things differ per data set (depending on #baselines, IF, pols..)
/home/euro/aipsdvlp/TR17C-6.UVF
Try this file with NPLOTS 9 - it will show only 7. The last plot on
separate page appears eg with APARM(9) 1, and with APARM(9) 0, the
plots shown with DOTV 1 is less than with DOTV -1 (the last plot quickly
overwrites the one before so you can't see it on tv)
Inpust used to POSSM are below
Regards,
Loránt Sjouwerman - VLBA Scientific Services - lsjouwerman at aoc.nrao.edu
-----------------------------------------------------------------------
c/o NRAO Array Operations Center Phone: +1-505-835-7332
P.O. Box 0 (1003 Lopezville Rd) Switch: +1-505-835-7000
Socorro NM 87801 Fax: +1-505-835-7027
AIPS 1: POSSM Task to plot total and cross-power spectra.
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 User number
AIPS 1: INNAME 'TR017C ' Input UV file name (name)
AIPS 1: INCLASS 'FQ-6 ' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 2 Input UV file disk unit #
AIPS 1: SOURCES *all ' ' Source list
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: UVRANG 0 0 UV range to be plotted
AIPS 1: TIMERANG *all 0 Time range to be plotted
AIPS 1: STOKES ' ' Stokes type(s) to select.
AIPS 1: BIF 0 Lowest IF number 0=>all
AIPS 1: EIF 0 Highest IF number 0=>all
AIPS 1: BCHAN 1 Lowest channel number 0=>all
AIPS 1: ECHAN 0 Highest channel number 0=>all
AIPS 1: SUBARRAY 1 Subarray, 0=>1
AIPS 1: ANTENNAS *all 0 Antennas to select
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: DOCALIB 2 If >0 calibrate data
AIPS 1: = 2 calibrate weights
AIPS 1: GAINUSE 0 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: FLAGVER -1 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: SHIFT 0 0 Position shift:
AIPS 1: APARM 0 0 Control information:
AIPS 1: 0.5 1.3 1: = 0 => scalar average
AIPS 1: -20 20 > 0 => vector average
AIPS 1: 1 2 2: = 0 => self-scale
AIPS 1: 1 0 > 0 => fixed scale
AIPS 1: CODETYPE ' ' 'A&P ', 'AMP ', 'PHAS',
AIPS 1: 'R&I ', 'REAL', 'IMAG'
AIPS 1: other => 'A&P '
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: SOLINT 0 If SOLINT > 0 then it enables
AIPS 1: NPLOTS 9 Number of plots per page
AIPS 1: BPARM *all 0 More control information:
AIPS 1: OUTFILE ' '
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: BADDISK *all 0 Disks to avoid for scratch
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 4 Graphics channel 0 => 1.
More information about the Daip
mailing list