[daip] FITLD message

Lorant Sjouwerman, NRAO lsjouwer at aoc.nrao.edu
Fri Jan 25 16:40:50 EST 2002


Hi all,

Does anybody know what this means in FITLD (version 31DEC02)

euro  > FITLD1: Rejected    354 records based on weights
euro  > FITLD1:    36586 vis. written
euro  > FITLD1: BA2BP: USING UNTESTED ROUTINE: SELECTION NOT IMPLEMENTED
euro  > FITLD1: ---------- FILE   1 LOADED ----------

I am using the VLBALOAD procedure with the following inputs on LINUX
for recently correlated data (full inputs and message file attached)

>outd 1;outn'bs104ab';ncou 2;mount;inp vlbaload;vlbaload;dism
AIPS 1: Mounted on ANSI SCSI 2 tape on local host
AIPS 1: VLBALOAD: Procedure to load VLBA data from tape
AIPS 1: Adverbs     Values                 Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE        3                    Input tape drive number
AIPS 1: NFILES        0                    # of files to advance on tape
AIPS 1: NCOUNT        2                    Number of files to load
AIPS 1:                                    (read from insert card)
AIPS 1: OUTNAME    'BS104AB     '          Output file name
AIPS 1: OUTDISK       1                    Disk drive for output data
AIPS 1:                                    (0 => any)
AIPS 1: DOUVCOMP     -1                    >0 => write compressed data
AIPS 1: CLINT         0.5                  CL entry interval (min)
AIPS 1:                                    0 => 1 minute
AIPS 1:
AIPS 1:           VLBALOAD is defined in the VLBAUTIL run file.
AIPS 1: Resumes
AIPS 1: 'VLBALOAD HAS FLAGGED ALL DATA WITH WEIGHT BELOW 0.7'
>




Regards,

Lorant Sjouwerman - VLBA Scientific Services - lsjouwerman at aoc.nrao.edu
-----------------------------------------------------------------------
c/o NRAO Array Operations Center       Phone:  +1-505-835-7332
    P.O. Box 0 (1003 Lopezville Rd)    Switch: +1-505-835-7000
    Socorro NM 87801                   Fax:    +1-505-835-7027
-------------- next part --------------
>outd 1;outn'bs104ab';ncou 2;mount;inp vlbaload;vlbaload;dism
AIPS 1: Mounted on ANSI SCSI 2 tape on local host
AIPS 1: VLBALOAD: Procedure to load VLBA data from tape
AIPS 1: Adverbs     Values                 Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE        3                    Input tape drive number
AIPS 1: NFILES        0                    # of files to advance on tape
AIPS 1: NCOUNT        2                    Number of files to load
AIPS 1:                                    (read from insert card)
AIPS 1: OUTNAME    'BS104AB     '          Output file name
AIPS 1: OUTDISK       1                    Disk drive for output data
AIPS 1:                                    (0 => any)
AIPS 1: DOUVCOMP     -1                    >0 => write compressed data
AIPS 1: CLINT         0.5                  CL entry interval (min)
AIPS 1:                                    0 => 1 minute
AIPS 1:
AIPS 1:           VLBALOAD is defined in the VLBAUTIL run file.
AIPS 1: Resumes
AIPS 1: 'VLBALOAD HAS FLAGGED ALL DATA WITH WEIGHT BELOW 0.7'
>
euro  > FITLD1: Task FITLD  (release of 31DEC02) begins
euro  > FITLD1: Reading tape drive number   3
euro  > FITLD1: Reading tape at current position
euro  > FITLD1: Correlator code version: 4.22
euro  > FITLD1:     FITLD Version 10.5.1
euro  > FITLD1:     Last updated on November 17 1999
euro  > FITLD1:     Recognize and handle OVLBI time filters
euro  > FITLD1:     Fix duplicate SU entries, result of CALCODEs
euro  > FITLD1:     Read multiple uv tables per FITS file
euro  > FITLD1:     Deal correctly with weights as an array
euro  > FITLD1:     Antenna numbers in MC table numbered correctly
euro  > FITLD1:     Read FLAG and WEATHER tables
euro  > FITLD1:     Reads a-priori information for VLBA
euro  > FITLD1:     Adjusts AN table reference frequency
euro  > FITLD1:     Can now do calibration transfer
euro  > FITLD1:     Checks for invalid calibration tables
euro  > FITLD1:     Does not round frequencies excessively
euro  > FITLD1:     Now concatenates cal transfer tables
euro  > FITLD1:     Now handles correct u,v,w labels
euro  > FITLD1:     Now handles explicit subarrays
euro  > FITLD1:     Tolerates data out of time order within days
euro  > FITLD1:     Weights now proportional to integration time for VLBA
euro  > FITLD1:     VLBA saturation correction now applied correctly
euro  > FITLD1: Data with weight <  0.70 will be permanently flagged
euro  > FITLD1: Create BS104AB     .UVDATA.   1 (UV)  on disk  1  cno    1
euro  > FITLD1: Sky frequencies (MHz) before re-ordering occurs:
euro  > FITLD1: Incoming FREQID #   1
euro  > FITLD1:  4971.49   4979.49   4987.49   4995.49
euro  > FITLD1: Warning: table type OB is of zero length
euro  > FITLD1: CL table interval set at  0.50 minutes
euro  > FITLD1:            !!!!!!!!!!!
euro  > FITLD1: Digital corrections being performed
euro  > FITLD1: Total power corrected even if no zero-padding
euro  > FITLD1:            !!!!!!!!!!!
euro  > FITLD1: Current file has    36940 visibilities
euro  > FITLD1: File ref. freq:     4971.49 MHz
euro  > FITLD1: Found J0610+7248       at   0/04:36:25 src #   1
euro  > FITLD1:                                        fqid #   1
euro  > FITLD1: Found MRK3             at   0/04:37:11 src #   2
euro  > FITLD1: Found J0610+7248       at   0/04:41:21 src #   1
euro  > FITLD1: Found MRK3             at   0/04:42:11 src #   2
euro  > FITLD1:    10000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/04:46:21 src #   1
euro  > FITLD1: Found MRK3             at   0/04:47:09 src #   2
euro  > FITLD1:    20000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/04:51:19 src #   1
euro  > FITLD1: Found MRK3             at   0/04:52:09 src #   2
euro  > FITLD1:    30000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/04:56:19 src #   1
euro  > FITLD1: Found MRK3             at   0/04:57:09 src #   2
euro  > FITLD1: UV table spanned time:   0/04:36:25 -  0/05:00:30
euro  > FITLD1: Rejected    354 records based on weights
euro  > FITLD1:    36586 vis. written
euro  > FITLD1: BA2BP: USING UNTESTED ROUTINE: SELECTION NOT IMPLEMENTED
euro  > FITLD1: ---------- FILE   1 LOADED ----------
euro  > FITLD1: Data with weight <  0.70 will be permanently flagged
euro  > FITLD1: Sky frequencies (MHz) before re-ordering occurs:
euro  > FITLD1: Incoming FREQID #   1
euro  > FITLD1:  4971.49   4979.49   4987.49   4995.49
euro  > FITLD1: Warning: table type OB is of zero length
euro  > FITLD1: Attaching data to BS104AB     .UVDATA.   1 Vol:   1
euro  > FITLD1: CL table interval set at  0.50 minutes
euro  > FITLD1: Current file has   273995 visibilities
euro  > FITLD1: File ref. freq:     4971.49 MHz
euro  > FITLD1: Found MRK3             at   0/05:00:47 src #   2 was    1
euro  > FITLD1:                                        fqid #   1
euro  > FITLD1: Found J0610+7248       at   0/05:01:18 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:02:07 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/05:06:16 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:07:07 src #   2 was    1
euro  > FITLD1:    10000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:11:16 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:12:07 src #   2 was    1
euro  > FITLD1:    20000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:16:16 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:17:04 src #   2 was    1
euro  > FITLD1:    30000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:21:14 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:22:04 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/05:26:14 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:27:04 src #   2 was    1
euro  > FITLD1:    40000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:31:14 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:32:02 src #   2 was    1
euro  > FITLD1:    50000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:36:11 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:37:02 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/05:39:12 src #   1 was    2
euro  > FITLD1: Found J0639+7324       at   0/05:40:02 src #   3
euro  > FITLD1:    60000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:42:10 src #   1 was    2
euro  > FITLD1: Found J0530+1331       at   0/05:45:04 src #   4
euro  > FITLD1:    70000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:49:49 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:52:29 src #   2 was    1
euro  > FITLD1:    80000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/05:56:38 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/05:57:29 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/06:01:38 src #   1 was    2
euro  > FITLD1:    90000 vis. written
euro  > FITLD1: Found MRK3             at   0/06:02:26 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/06:06:38 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:07:26 src #   2 was    1
euro  > FITLD1:   100000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:11:36 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:12:26 src #   2 was    1
euro  > FITLD1:   110000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:16:36 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:17:26 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/06:21:34 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:22:24 src #   2 was    1
euro  > FITLD1:   120000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:26:33 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:27:24 src #   2 was    1
euro  > FITLD1:   130000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:31:33 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:32:24 src #   2 was    1
euro  > FITLD1:   140000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:36:31 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:37:21 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/06:41:31 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:42:21 src #   2 was    1
euro  > FITLD1:   150000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:46:31 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/06:47:19 src #   2 was    1
euro  > FITLD1:   160000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/06:51:29 src #   1 was    2
euro  > FITLD1: Found J0639+7324       at   0/06:52:19 src #   3
euro  > FITLD1: Found J0610+7248       at   0/06:54:19 src #   1 was    2
euro  > FITLD1: Found J0555+3948       at   0/06:57:23 src #   5
euro  > FITLD1:   170000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:01:18 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:03:18 src #   2 was    1
euro  > FITLD1:   180000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:05:28 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:06:18 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/07:10:25 src #   1 was    2
euro  > FITLD1:   190000 vis. written
euro  > FITLD1: Found MRK3             at   0/07:11:16 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/07:15:25 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:16:16 src #   2 was    1
euro  > FITLD1:   200000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:20:25 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:21:15 src #   2 was    1
euro  > FITLD1:   210000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:25:25 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:26:13 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/07:30:23 src #   1 was    2
euro  > FITLD1:   220000 vis. written
euro  > FITLD1: Found MRK3             at   0/07:31:13 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/07:35:23 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:36:13 src #   2 was    1
euro  > FITLD1:   230000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:40:21 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:41:11 src #   2 was    1
euro  > FITLD1:   240000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:45:20 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:46:11 src #   2 was    1
euro  > FITLD1: Found J0610+7248       at   0/07:50:20 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:51:11 src #   2 was    1
euro  > FITLD1:   250000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/07:55:18 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/07:56:08 src #   2 was    1
euro  > FITLD1:   260000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/08:00:18 src #   1 was    2
euro  > FITLD1: Found MRK3             at   0/08:01:08 src #   2 was    1
euro  > FITLD1:   270000 vis. written
euro  > FITLD1: Found J0610+7248       at   0/08:05:18 src #   1 was    2
euro  > FITLD1: UV table spanned time:   0/05:00:47 -  0/08:06:02
euro  > FITLD1: Rejected   1428 records based on weights
euro  > FITLD1:   272567 vis. written
euro  > FITLD1: BA2BP: USING UNTESTED ROUTINE: SELECTION NOT IMPLEMENTED
euro  > FITLD1: Image=MULTI     (UV)         Filename=BS104AB     .UVDATA.   1
euro  > FITLD1: Telescope=VLBA               Receiver=VLBA
euro  > FITLD1: Observer=BS104               User #=  103
euro  > FITLD1: Observ. date=07-JAN-2002     Map date=25-JAN-2002
euro  > FITLD1: # visibilities    309153     Sort order  TB
euro  > FITLD1: Rand axes: UU-L-SIN  VV-L-SIN  WW-L-SIN  TIME1  BASELINE
euro  > FITLD1:            SOURCE  FREQSEL  INTTIM  GATEID  CORR-ID
euro  > FITLD1: ----------------------------------------------------------------
euro  > FITLD1: Type    Pixels   Coord value     at Pixel     Coord incr   Rotat
euro  > FITLD1: COMPLEX      3   1.0000000E+00       1.00  1.0000000E+00    0.00
euro  > FITLD1: STOKES       1  -2.0000000E+00       1.00 -1.0000000E+00    0.00
euro  > FITLD1: FREQ        16   4.9714900E+09       0.53  5.0000000E+05    0.00
euro  > FITLD1: IF           4   1.0000000E+00       1.00  1.0000000E+00    0.00
euro  > FITLD1: RA           1    00 00 00.000       1.00       0.000000    0.00
euro  > FITLD1: DEC          1    00 00 00.000       1.00       0.000000    0.00
euro  > FITLD1: ----------------------------------------------------------------
euro  > FITLD1: Coordinate equinox 2000.00
euro  > FITLD1: Maximum version number of extension files of type HI is   1
euro  > FITLD1: Maximum version number of extension files of type AT is   1
euro  > FITLD1: Maximum version number of extension files of type IM is   1
euro  > FITLD1: Maximum version number of extension files of type CT is   1
euro  > FITLD1: Maximum version number of extension files of type MC is   1
euro  > FITLD1: Maximum version number of extension files of type OB is   1
euro  > FITLD1: Maximum version number of extension files of type GC is   1
euro  > FITLD1: Maximum version number of extension files of type TY is   1
euro  > FITLD1: Maximum version number of extension files of type WX is   1
euro  > FITLD1: Maximum version number of extension files of type PC is   1
euro  > FITLD1: Maximum version number of extension files of type NX is   1
euro  > FITLD1: Maximum version number of extension files of type CL is   1
euro  > FITLD1: Maximum version number of extension files of type FQ is   1
euro  > FITLD1: Maximum version number of extension files of type AN is   1
euro  > FITLD1: Maximum version number of extension files of type SU is   1
euro  > FITLD1: Maximum version number of extension files of type CQ is   1
euro  > FITLD1: Maximum version number of extension files of type FG is   1
euro  > FITLD1: ---------- FILE   2 LOADED ----------
euro  > FITLD1: Appears to have ended successfully
euro  > FITLD1: euro         31DEC02 TST: Cpu=      89.5  Real=     127

tget fitld
>inp
AIPS 1: FITLD:  Task to store an image or UV data from a FITS tape
AIPS 1: Adverbs     Values                 Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE        3                    Input tape drive # (0 => 1)
AIPS 1: NFILES        0                    # of files to advance on tape
AIPS 1: INFILE     *all ' '                Disk file name (FITS only)
AIPS 1: OUTNAME    'BS104AB     '          File name (name)
AIPS 1: OUTCLASS   '      '                File name (class)
AIPS 1: OUTSEQ        0                    File name (seq. #)
AIPS 1:                                       0 => highest unique number
AIPS 1:                                         => matching (on VLBA)
AIPS 1:                                      -1 => FITS tape value
AIPS 1: OUTDISK       1                    Disk drive # (0 => any)
AIPS 1: OPTYPE     '    '                  Type of data to load,
AIPS 1:                                    '  ' => all types
AIPS 1:                                    'UV' => UV data
AIPS 1:                                    'IM' => images
AIPS 1: NCOUNT        2                    Number of files to load.
AIPS 1: DOTABLE       1                    True (1.0) means load tables
AIPS 1:                                    for images.
AIPS 1: DOUVCOMP     -1                    >0 => compressed data (FITS)
AIPS 1: DOCONCAT      1                    >0 -> if VLBA or uv table,
AIPS 1:                                    append data to existing
AIPS 1:                                    files, or if no appropriate
AIPS 1:                                    files exist create a new file
AIPS 1:                                    and append all data to that
AIPS 1:                                    file.
AIPS 1:                                    *****************************
AIPS 1:                                    Following adverbs are useful
AIPS 1:                                    only when reading VLBA
AIPS 1:                                    distribution tapes.
AIPS 1:                                    *****************************
AIPS 1: CLINT         0.5                  CL entry interval (min)
AIPS 1:                                    0 => 1 minute.
AIPS 1: SOURCES    *all ' '                Source list to accept.
AIPS 1: QUAL         -1                    Source qualifier -1=>all
AIPS 1: TIMERANG   *all 0                  Timerange selected
AIPS 1: BCHAN         0                    Lowest spectral channel
AIPS 1:                                    number to select in each IF.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1:                                    0=>1
AIPS 1: ECHAN         0                    Highest spectral channel
AIPS 1:                                    number to select in each IF.
AIPS 1:                                    0=>highest
AIPS 1: BIF           0                    Lowest IF number 0=>1
AIPS 1: EIF           0                    Highest IF number 0=>all
AIPS 1: DIGICOR       1                    Controls the application of
AIPS 1:                                    the VLBA correlator's digital
AIPS 1:                                    correction.
AIPS 1:                                    0 or 1 => perform corrections
AIPS 1:                                    2 => perform cross-power
AIPS 1:                                      corrections, do total-power
AIPS 1:                                      only if zero padding used.
AIPS 1:                                    -1 => do NOT perform
AIPS 1:                                      corrections.
AIPS 1:                                    SEE HELP for more details
AIPS 1: SELBAND       0                    Bandwidth to select (kHz)
AIPS 1: SELFREQ       0                    Frequency to select (MHz).
AIPS 1:                                    See HELP.
AIPS 1: FQTOL        -1                    Frequency tolerance assigned
AIPS 1:                                    to SELFREQ, FITLD will select
AIPS 1:                                    data with freq. of SELFREQ
AIPS 1:                                    +/- FQTOL.
AIPS 1:                                    The unit of FQTOL is kHz.
AIPS 1:                                    <=0 => 10 kHz
AIPS 1: WTTHRESH      0.7                  Flagging threshold based on
AIPS 1:                                    weights. See HELP.
AIPS 1:                                    0 => no flagging
AIPS 1:                                    1 => will flag ALL data
AIPS 1: OPCODE     '    '                  Specify if wish to keep VT
AIPS 1:                                    (VLBA Tape Statistics) table.
AIPS 1:                                    '  ' => do not copy VT table
AIPS 1:                                    'VT' => keep VT table
AIPS 1: NPIECE       90                    Maximum uv table piece to
AIPS 1:                                    load (ignored for tape unless
AIPS 1:                                    NCOUNT = 1)
>


More information about the Daip mailing list