[daip] Greenhill's IMAGR problem
Lincoln Greenhill
lincoln at play.harvard.edu
Wed Oct 17 09:54:55 EDT 2001
Dear Eric,
I meant to type 31DEC01. Sorry for the typo. I must have been
in another world. The runs are being done on a LINUX PC (not PPC).
Here are the inputs. If you would like the messages in full for IMAGR,
they are attached. Please note (1) the flux cutoff was 0.08 as you
guessed, (2) that cutoff was given to IMAGR via TELL, well before the
point at which problems occurred (iter ~1200), (3) to stop IMAGR I used
TELL to send a too small NITER.
Hope this is of use/interest.
Regards,
L.
AIPS 1: INNAME 'RF229P23B050' Input UV data (name)
AIPS 1: INCLASS 'CALIB ' Input UV data (class)
AIPS 1: INSEQ 1 Input UV data (seq. #)
AIPS 1: INDISK 3 Input UV data disk drive #
AIPS 1: SOURCES 'BNKL-I ' Source name
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Calibrator qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: TIMERANG *all 0 Time range to use
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: SUBARRAY 0 Sub-array, 0=>all
AIPS 1: DOCALIB -1 If >0 calibrate data
AIPS 1: = 2 calibrate weights
AIPS 1: GAINUSE 9 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0.5 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 1 Flag table version
AIPS 1: DOBAND -1 If >0.5 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: STOKES ' ' Stokes parameters (see HELP)
AIPS 1: BCHAN 0 Low freq. channel 0 for cont.
AIPS 1: ECHAN 0 Highest freq channel
AIPS 1: CHANNEL 0 Restart channel number
AIPS 1: NPOINTS 1 Number of chan. to average.
AIPS 1: CHINC 1 Channel incr. between maps.
AIPS 1: BIF 0 First IF in average.
AIPS 1: EIF 0 Last IF in average.
AIPS 1: OUTNAME 'RF229P23B050' Output image name (name)
AIPS 1: OUTDISK 3 Output image disk drive #
AIPS 1: OUTSEQ 0 Output seq. no.
AIPS 1: OUTVER 0 CC ver. no (Continuum only)
AIPS 1: *** SET OUTVER ON RESTARTS
AIPS 1: IN2NAME ' ' UV work file name
AIPS 1: IN2CLASS ' ' UV work file class
AIPS 1: IN2SEQ 0 UV work file seq
AIPS 1: *** SET TO KEEP WORK FILE
AIPS 1: IN2DISK 3 UV work file disk
AIPS 1: CELLSIZE 5.000E-05 5.000E-05 (X,Y) size of grid in asec
AIPS 1: IMSIZE 8192 8192 Minimum image size
AIPS 1: NFIELD 1 Number of fields (max. 512)
AIPS 1: DO3DIMAG -1 > 0 => use different tangent
AIPS 1: points for each field
AIPS 1: FLDSIZE *all 0 Clean size of each field.
AIPS 1: RASHIFT *all 0 RA shift per field (asec)
AIPS 1: DECSHIFT -0.07 *rest 0 DEC shift per field (asec)
AIPS 1: UVTAPER 0 0 (U,V) Gaussian taper
AIPS 1: units are kilo-lambda
AIPS 1: UVRANGE 0 0 Min & max baseline (klambda)
AIPS 1: GUARD 0 0 x,y guard band fractional
AIPS 1: radius
AIPS 1: ROTATE 0 Rotate image CCW from N by
AIPS 1: ROTATE degrees
AIPS 1: ZEROSP *all 0 0-spacing fluxes and weights
AIPS 1: SEE HELP!!
AIPS 1: UVWTFN ' ' UV dist. weight function
AIPS 1: blank => uniform
AIPS 1: UVSIZE 0 0 Array size for doing uniform
AIPS 1: weights. 0 -> actual field
AIPS 1: size.
AIPS 1: ROBUST -1 Robustness power: -5 -> pure
AIPS 1: uniform weights, 5 => natural
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: UVBOX 0 Additional rows and columns
AIPS 1: UVBXFN 1 Box function type when UVBOX
AIPS 1: > 0. 0 -> 1 round pill box.
AIPS 1: XTYPE 5 Conv. function type in x
AIPS 1: default spheroidal
AIPS 1: YTYPE 5 Conv. function type in y
AIPS 1: default spheroidal
AIPS 1: XPARM *all 0 Conv. function parms for x
AIPS 1: YPARM *all 0 Conv. function parms for y
AIPS 1: NITER 9999 Maximum # of Clean components
AIPS 1: BCOMP *all 0 Begin at BCOMP component
AIPS 1: Specify for each field.
AIPS 1: ALLOKAY 0 For restart: > 0 => beams
AIPS 1: okay, > 1 => work file too
AIPS 1: NBOXES 0 Number of boxes for Clean
AIPS 1: NB: field 1 only.
AIPS 1: CLBOX *all 0 Four coordinates for each box
AIPS 1: BOXFILE 'HOME:BG118A.BOX Input file of field params
AIPS 1:
AIPS 1: '
AIPS 1: and Clean boxes; ' ' => use
AIPS 1: FLDSIZE, RASHIFT, DECSHIFT,
AIPS 1: NBOXES, CLBOX only.
AIPS 1: OBOXFILE 'HOME:BG118A.BOX Output file for final Clean
AIPS 1:
AIPS 1: '
AIPS 1: boxes
AIPS 1: GAIN 0.1 Clean loop gain
AIPS 1: FLUX 0.15 Minimum Clean component (Jy)
AIPS 1: MINPATCH 4096 Min. BEAM half-width in AP.
AIPS 1: BMAJ 0 FWHM(asec) major axis Clean
AIPS 1: restoring beam.
AIPS 1: BMIN 0 FWHM(asec) minor axis Clean
AIPS 1: restoring beam.
AIPS 1: BPA 0 Clean beam position angle
AIPS 1: OVERLAP 0 1 => restore components to
AIPS 1: overlapped fields, >=2=>
AIPS 1: expect overlaps in Cleaning
AIPS 1: PHAT 0 Prussian hat height.
AIPS 1: FACTOR 0 Speedup factor see HELP
AIPS 1: CMETHOD ' ' Modeling method:
AIPS 1: 'DFT','GRID',' '
AIPS 1: IMAGRPRM *all 0 Task enrichment parameters
AIPS 1: (1) Antenna diameter (m)
AIPS 1: (2) Source Spectral index
AIPS 1: (3) Frequency scaling factor
AIPS 1: (4) > 0 -> SDI Clean factor
AIPS 1: (5) >0 => scale residuals
AIPS 1: (6) Half-width in x of box
AIPS 1: (7) Half-width in y of box
AIPS 1: (8) Filter components whose
AIPS 1: neighborhood is weaker than
AIPS 1: IMAGRPRM(8) Jy. 0 -> don't
AIPS 1: (9) Radius in pixels for the
AIPS 1: IMAGRPRM(8) test.
AIPS 1: (10) multiplier of image size
AIPS 1: to get beam size: 0 => 2;
AIPS 1: 2, 1, 0.5 0.25 supported
AIPS 1: (11-15) Multi-resolution
AIPS 1: added controls
AIPS 1: (20) Retry factor (see help)
AIPS 1: (20) Retry factor (see help)
AIPS 1: NGAUSS 0 Number of resolutions to use
AIPS 1: WGAUSS *all 0 Resolutions in arc sec >= 0
AIPS 1: FGAUSS *all 0 Minimum flux for each resol.
AIPS 1: MAXPIXEL 0 Maximum pixels searched in
AIPS 1: each major cycle.
AIPS 1: DOTV -1 Display residuals on TV ?
AIPS 1: Start with field = DOTV
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: BADDISK *all 0 Disks to avoid for scratch.
-------------- next part --------------
rglinux2 AIPS (31DEC01) 24 17-OCT-2001 09:48:50 Page 1
Pops Prior Date Time Task Messages for user 24
1 5 16-OCT-2001 18:31:05 IMAGR Task IMAGR (release of 31DEC01) begins
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: using translated file name =
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: /home/lincoln/BG118A.BOX
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: using translated file name =
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: /home/lincoln/BG118A.BOX
1 7 16-OCT-2001 18:31:05 IMAGR WINDF: Number of clean boxes/field read as follows:
1 3 16-OCT-2001 18:31:05 IMAGR Field 01: 10
1 2 16-OCT-2001 18:31:05 IMAGR FNDPOL: Stokes I computed assuming V=0
1 2 16-OCT-2001 18:31:05 IMAGR FNDPOL: Stokes I computed assuming V=0
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: using translated file name =
1 2 16-OCT-2001 18:31:05 IMAGR ZTXOP2: /home/lincoln/BG118A.BOX
1 2 16-OCT-2001 18:31:05 IMAGR FNDPOL: Stokes I computed assuming V=0
1 2 16-OCT-2001 18:31:05 IMAGR Create RF229P23B050.IMAGR . 1 (UV) on disk 3 cno 57
1 4 16-OCT-2001 18:31:05 IMAGR Beginning channel 1 through 1 with 1 IFs
1 2 16-OCT-2001 18:31:05 IMAGR FNDPOL: Stokes I computed assuming V=0
1 3 16-OCT-2001 18:31:06 IMAGR IMACPY: Copied 345500 visibilities to be imaged
1 2 16-OCT-2001 18:31:06 IMAGR OUNFWT: Sorting data to make them fit
1 2 16-OCT-2001 18:31:07 IMAGR UVWAIT: begin finding uniform weights
1 2 16-OCT-2001 18:31:07 IMAGR UVWAIT: Average grid weight 3.045E-06
1 2 16-OCT-2001 18:31:07 IMAGR UVWAIT: Adding temperance S 6.090E-08
1 2 16-OCT-2001 18:31:07 IMAGR UVWAIT: begin applying uniform or other weights
1 8 16-OCT-2001 18:31:07 IMAGR UVWAIT U, V, NR, WT <= 0 1144 3671 437934 -3.0812E+07
1 4 16-OCT-2001 18:31:08 IMAGR UVWAIT: Sum of weights in 9.774E-03 and out 3.739E-02
1 4 16-OCT-2001 18:31:08 IMAGR UVWAIT: Noise is increased by a factor 1.608 due to weighting
1 4 16-OCT-2001 18:31:08 IMAGR UVWAIT: Average summed weight -8.918E+01 over 345500 vis
1 2 16-OCT-2001 18:31:08 IMAGR Create RF229P23B050.IBM001. 1 (MA) on disk 3 cno 58
1 2 16-OCT-2001 18:31:08 IMAGR Create RF229P23B050.ICL001. 1 (MA) on disk 3 cno 59
1 2 16-OCT-2001 18:31:26 IMAGR GRDFLT: X and Y convolution type = SPHEROIDAL
1 2 16-OCT-2001 18:31:26 IMAGR GRDFLT: X and Y parms = 3.0000 1.0000
1 2 16-OCT-2001 18:31:26 IMAGR GRDFLT: convolution function sampled every 1/100 of a cell
1 2 16-OCT-2001 18:31:26 IMAGR GRIDUV: Only 314 Rows in 1280k AP
1 2 16-OCT-2001 18:31:26 IMAGR GRIDUV: Max U Baseline 735991040. lambda (= 367 cells)
1 2 16-OCT-2001 18:31:26 IMAGR GRIDUV: Frequency 4.311384E+10 Hz
1 4 16-OCT-2001 18:31:27 IMAGR Field 1 Sum of gridding weights = 3.96938E-01
1 4 16-OCT-2001 18:31:28 IMAGR Field 1 Beam min = -278.8 MilliJy, max = 1.0 Jy
1 4 16-OCT-2001 18:31:28 IMAGR Field 1 fit FWHM = 554.949 x 208.840 Microarcsec, PA= 14.5
1 4 16-OCT-2001 18:32:15 IMAGR Field 1 min = -11.3 Jy,max = 44.3 Jy
1 2 16-OCT-2001 18:32:17 IMAGR BGC Clean: using 1611 cell beam + residuals > 4.66 Jy
1 2 16-OCT-2001 18:32:19 IMAGR 2371 Residual map points loaded
1 4 16-OCT-2001 18:32:19 IMAGR Reached minimum algorithm flux = 19.453 Jy iter= 20
1 3 16-OCT-2001 18:32:19 IMAGR Total Cleaned flux density = 57.204 Jy 20 comps
1 2 16-OCT-2001 18:32:19 IMAGR VISDFT: Begin DFT component subtraction
1 2 16-OCT-2001 18:32:19 IMAGR VISDFT: Model components of type Point
1 3 16-OCT-2001 18:32:19 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:33:10 IMAGR Field 1 min = -7.5 Jy,max = 19.4 Jy
1 2 16-OCT-2001 18:33:12 IMAGR BGC Clean: using 1609 cell beam + residuals > 2.04 Jy
1 2 16-OCT-2001 18:33:15 IMAGR 3936 Residual map points loaded
1 4 16-OCT-2001 18:33:15 IMAGR Reached minimum algorithm flux = 5.108 Jy iter= 99
1 3 16-OCT-2001 18:33:15 IMAGR Total Cleaned flux density = 134.789 Jy 99 comps
1 2 16-OCT-2001 18:33:15 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:33:15 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:34:05 IMAGR Field 1 min = -2.8 Jy,max = 5.1 Jy
1 2 16-OCT-2001 18:34:07 IMAGR BGC Clean: using 1601 cell beam + residuals > 538.08 MilliJy
1 2 16-OCT-2001 18:34:09 IMAGR 7542 Residual map points loaded
1 4 16-OCT-2001 18:34:09 IMAGR Reached minimum algorithm flux = 1.227 Jy iter= 364
1 3 16-OCT-2001 18:34:09 IMAGR Total Cleaned flux density = 200.906 Jy 364 comps
rglinux2 AIPS (31DEC01) 24 17-OCT-2001 09:48:50 Page 2
Pops Prior Date Time Task Messages for user 24
1 2 16-OCT-2001 18:34:46 IMAGR ALGSUB: Ipol gridded model subtraction, chans 1 through 1
1 4 16-OCT-2001 18:35:30 IMAGR Field 1 min = -935.9 MilliJy,max = 1.2 Jy
1 2 16-OCT-2001 18:35:32 IMAGR BGC Clean: using 1585 cell beam + residuals > 128.59 MilliJy
1 2 16-OCT-2001 18:35:32 IMAGR 16223 Residual map points loaded
1 4 16-OCT-2001 18:35:33 IMAGR Reached minimum algorithm flux = 282.268 MilliJy iter= 1206
1 3 16-OCT-2001 18:35:33 IMAGR Total Cleaned flux density = 245.617 Jy 1206 comps
1 2 16-OCT-2001 18:35:42 IMAGR ALGSUB: Ipol gridded model subtraction, chans 1 through 1
1 4 16-OCT-2001 18:36:42 IMAGR Field 1 min = -560.6 MilliJy,max = 640.8 MilliJy
1 4 16-OCT-2001 18:36:44 IMAGR CLNTEL: TELL operation code CHAN received
1 2 16-OCT-2001 18:36:44 IMAGR BGC Clean: using 205 cell beam + residuals > 55.06 MilliJy
1 2 16-OCT-2001 18:36:46 IMAGR 19993 Residual map points loaded
1 4 16-OCT-2001 18:36:47 IMAGR Reached minimum algorithm flux = 100.993 MilliJy iter= 2784
1 3 16-OCT-2001 18:36:47 IMAGR Total Cleaned flux density = 267.339 Jy 2784 comps
1 2 16-OCT-2001 18:36:56 IMAGR ALGSUB: Ipol gridded model subtraction, chans 1 through 1
1 4 16-OCT-2001 18:37:48 IMAGR Field 1 min = -512.8 MilliJy,max = 540.3 MilliJy
1 2 16-OCT-2001 18:37:49 IMAGR BGC Clean: using 205 cell beam + residuals > 32.92 MilliJy
1 2 16-OCT-2001 18:37:49 IMAGR 19992 Residual map points loaded
1 4 16-OCT-2001 18:37:50 IMAGR Reached min. Clean flux density= 79.967 MilliJy iter= 3216
1 5 16-OCT-2001 18:37:50 IMAGR Total Cleaned flux density = 270.837 Jy 3216 comps
1 2 16-OCT-2001 18:37:59 IMAGR ALGSUB: Ipol gridded model subtraction, chans 1 through 1
1 4 16-OCT-2001 18:38:55 IMAGR Field 1 min = -504.5 MilliJy,max = 534.5 MilliJy
1 2 16-OCT-2001 18:38:55 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:38:56 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:38:56 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:38:56 IMAGR Reached min. Clean flux density= 74.887 MilliJy iter= 3217
1 5 16-OCT-2001 18:38:56 IMAGR Total Cleaned flux density = 270.844 Jy 3217 comps
1 2 16-OCT-2001 18:38:56 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:38:56 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:39:33 IMAGR Field 1 min = -504.6 MilliJy,max = 534.4 MilliJy
1 2 16-OCT-2001 18:39:35 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:39:35 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:39:35 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:39:35 IMAGR Reached min. Clean flux density= 74.029 MilliJy iter= 3218
1 5 16-OCT-2001 18:39:35 IMAGR Total Cleaned flux density = 270.851 Jy 3218 comps
1 2 16-OCT-2001 18:39:35 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:39:35 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:40:12 IMAGR Field 1 min = -504.5 MilliJy,max = 534.5 MilliJy
1 2 16-OCT-2001 18:40:13 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:40:13 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:40:13 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:40:13 IMAGR Reached min. Clean flux density= -71.314 MilliJy iter= 3219
1 5 16-OCT-2001 18:40:13 IMAGR Total Cleaned flux density = 270.844 Jy 3219 comps
1 2 16-OCT-2001 18:40:13 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:40:13 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:40:53 IMAGR Field 1 min = -504.5 MilliJy,max = 534.5 MilliJy
1 2 16-OCT-2001 18:40:55 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:40:55 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:40:55 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:40:55 IMAGR Reached min. Clean flux density= 70.460 MilliJy iter= 3220
1 5 16-OCT-2001 18:40:55 IMAGR Total Cleaned flux density = 270.851 Jy 3220 comps
1 2 16-OCT-2001 18:40:55 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:40:55 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:41:33 IMAGR Field 1 min = -504.5 MilliJy,max = 534.4 MilliJy
1 2 16-OCT-2001 18:41:34 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:41:34 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:41:34 IMAGR 844 Residual map points loaded
rglinux2 AIPS (31DEC01) 24 17-OCT-2001 09:48:50 Page 3
Pops Prior Date Time Task Messages for user 24
1 4 16-OCT-2001 18:41:34 IMAGR Reached min. Clean flux density= 67.931 MilliJy iter= 3221
1 5 16-OCT-2001 18:41:34 IMAGR Total Cleaned flux density = 270.858 Jy 3221 comps
1 2 16-OCT-2001 18:41:34 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:41:34 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:42:14 IMAGR Field 1 min = -504.4 MilliJy,max = 534.4 MilliJy
1 2 16-OCT-2001 18:42:15 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:42:15 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:42:15 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:42:15 IMAGR Reached min. Clean flux density= 67.644 MilliJy iter= 3222
1 5 16-OCT-2001 18:42:15 IMAGR Total Cleaned flux density = 270.865 Jy 3222 comps
1 2 16-OCT-2001 18:42:15 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:42:15 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:42:55 IMAGR Field 1 min = -504.4 MilliJy,max = 534.3 MilliJy
1 2 16-OCT-2001 18:42:56 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:42:56 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:42:56 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:42:56 IMAGR Reached min. Clean flux density= 65.118 MilliJy iter= 3223
1 5 16-OCT-2001 18:42:56 IMAGR Total Cleaned flux density = 270.871 Jy 3223 comps
1 2 16-OCT-2001 18:42:56 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:42:56 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:43:34 IMAGR Field 1 min = -504.4 MilliJy,max = 534.3 MilliJy
1 2 16-OCT-2001 18:43:35 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:43:35 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:43:35 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:43:35 IMAGR Reached min. Clean flux density= -63.691 MilliJy iter= 3224
1 5 16-OCT-2001 18:43:35 IMAGR Total Cleaned flux density = 270.865 Jy 3224 comps
1 2 16-OCT-2001 18:43:35 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:43:35 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:44:14 IMAGR Field 1 min = -504.4 MilliJy,max = 534.3 MilliJy
1 2 16-OCT-2001 18:44:15 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:44:15 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:44:15 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:44:15 IMAGR Reached min. Clean flux density= 62.291 MilliJy iter= 3225
1 5 16-OCT-2001 18:44:15 IMAGR Total Cleaned flux density = 270.871 Jy 3225 comps
1 2 16-OCT-2001 18:44:15 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:44:15 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:44:53 IMAGR Field 1 min = -504.3 MilliJy,max = 534.3 MilliJy
1 4 16-OCT-2001 18:44:54 IMAGR CLNTEL: TELL operation code CHAN received
1 2 16-OCT-2001 18:44:54 IMAGR BGC Clean: using 1615 cell beam + residuals > -61.04 MicroJy
1 8 16-OCT-2001 18:44:54 IMAGR CLMPAC: NOT ENOUGH ROOM FOR ALL MAP POINTS
1 2 16-OCT-2001 18:44:54 IMAGR 844 Residual map points loaded
1 4 16-OCT-2001 18:44:54 IMAGR Reached min. Clean flux density= 62.259 MilliJy iter= 3226
1 5 16-OCT-2001 18:44:54 IMAGR Total Cleaned flux density = 270.877 Jy 3226 comps
1 2 16-OCT-2001 18:44:54 IMAGR VISDFT: Begin DFT component subtraction
1 3 16-OCT-2001 18:44:54 IMAGR I Polarization model processed
1 4 16-OCT-2001 18:45:32 IMAGR Field 1 min = -504.4 MilliJy,max = 534.3 MilliJy
1 4 16-OCT-2001 18:45:33 IMAGR CLNTEL: TELL operation code CHAN received
1 4 16-OCT-2001 18:45:33 IMAGR Total Clean components 3226 exceeds limit 3220
1 3 16-OCT-2001 18:45:33 IMAGR Restoring Clean components
1 3 16-OCT-2001 18:47:57 IMAGR Checking image max/min
1 6 16-OCT-2001 18:48:04 IMAGR Deleting UV work file:
1 4 16-OCT-2001 18:48:04 IMAGR Destroyed 1 extension files of type AN
1 4 16-OCT-2001 18:48:04 IMAGR Destroyed 1 extension files of type FQ
1 4 16-OCT-2001 18:48:04 IMAGR Destroyed UV image file: catno= 57 disk= 3
1 3 16-OCT-2001 18:48:05 IMAGR Appears to have ended successfully
1 5 16-OCT-2001 18:48:05 IMAGR rglinux2 31DEC01 TST: Cpu= 638.3 Real= 1020
More information about the Daip
mailing list