[daip] question - RUN FILAIP
Hiroko Shinnaga
hshinnag at cfa.harvard.edu
Wed Nov 28 17:08:45 EST 2001
Eric,
Somehow, I did all the procedure. If possible,
could you briefly check the following result?
Thanks.
Hiroko
####################
[aips at ula AIPS]$ bash
[aips at ula AIPS]$ . ./LOGIN.SH
[aips at ula AIPS]$ $CSTST
[aips at ula AIPS]$ ls
31DEC01 AIPSPATH.SH HOSTS.SH REGISTER START_TVSERVERS
AIPSASSN.CSH DA00 INSTEP1 REGISTER.INFO TEXT
AIPSASSN.SH DATA LOGIN.CSH RUN TVALT
AIPS.BOOT HOSTS.CSH LOGIN.SH START_AIPS TVDEVS.SH
AIPSPATH.CSH HOSTS.LIST PRDEVS.SH START_TPSERVERS
[aips at ula AIPS]$ RUN FILAIP
Data disk assignments:
(Using global default file /home/aips/AIPS/DA00/DADEVS.LIST)
Disk 1 (1) is /home/aips/AIPS/DATA/ULA_1
Disk 2 (2) is /home/aips/AIPS/DATA/ULA_2
Disk 3 (3) is /home/aips/AIPS/DATA/ULA_3
Starting up FILAIP (RELEASE OF 31DEC01)
----------------------------------------------------------------------
Copyright (C) 2001
Associated Universities, Inc. Washington DC, USA.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 675 Massachusetts Ave, Cambridge,
MA 02139, USA.
Correspondence concerning AIPS should be addressed as follows:
Internet email: aipsmail at nrao.edu.
Postal address: AIPS Project Office
National Radio Astronomy Observatory
520 Edgemont Road
Charlottesville, VA 22903-2475 USA
----------------------------------------------------------------------
Password:
FILAI1: PASWORD DOES NOT MATCH --- TRY AGAIN
Password:
# disks, # cat entries/disk (<0 => private catlgs) (2 I)
35 -100
# interactive AIPS, # batch queues (2 I)
8 2
# tape drives (I)
4
FILAI1: ZCREAT: FILE DA00:BQD000000; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001001; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002001; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001002; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002002; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001003; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002003; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001004; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002004; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001005; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002005; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001006; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002006; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001007; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002007; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001008; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002008; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD001009; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:BAD002009; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:TDD000004; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:ICD000000; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA01:MSD001000.001; ALREADY EXISTS
FILAI1: MS FILE NOT INITIALIZED. USE FILINI IF YOU REALLY MEAN IT
FILAI1: ZCREAT: FILE TSTMEM:MED000000; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000001; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000002; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000003; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000004; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000005; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000006; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000007; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000008; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED000009; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED00000A; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:MED00000B; ALREADY EXISTS
FILAI1: Init POPS memory files 1 through 12 with program POPSGN
FILAI1: ZCREAT: FILE DA00:SPD000000; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:ACD000000; ALREADY EXISTS
FILAI1: AC FILE NOT INITIALIZED. USE FILINI IF YOU REALLY MEAN IT
FILAI1: ZCREAT: FILE DA00:TPD001001; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:TPD001002; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:TPD001003; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:TPD001004; ALREADY EXISTS
FILAI1: ZCREAT: FILE DA00:GRD000000; ALREADY EXISTS
FILAI1: GR FILE NOT INITIALIZED. USE FILINI IF YOU REALLY MEAN IT
FILAI1: ZCREAT: FILE DA00:PWD000000; ALREADY EXISTS
FILAI1: PW FILE NOT INITIALIZED. USE FILINI IF YOU REALLY MEAN IT
FILAI1: ZCREAT: FILE DA00:TCD000001; ALREADY EXISTS
FILAI1: Done!
[aips at ula AIPS]$ RUN POPSGN
Data disk assignments:
(Using global default file /home/aips/AIPS/DA00/DADEVS.LIST)
Disk 1 (1) is /home/aips/AIPS/DATA/ULA_1
Disk 2 (2) is /home/aips/AIPS/DATA/ULA_2
Disk 3 (3) is /home/aips/AIPS/DATA/ULA_3
Starting up POPSGN (RELEASE OF 31DEC01)
Enter Idebug, Mname, Version (1 I, 2 A's) (NO COMMAS)
0 POPSDAT TST
>
POPSG1: Popsgen complete
POPSG1: ula 31DEC01 TST: Cpu= 0.0 Real= 16
[aips at ula AIPS]$ RUN POPSGN
Data disk assignments:
(Using global default file /home/aips/AIPS/DA00/DADEVS.LIST)
Disk 1 (1) is /home/aips/AIPS/DATA/ULA_1
Disk 2 (2) is /home/aips/AIPS/DATA/ULA_2
Disk 3 (3) is /home/aips/AIPS/DATA/ULA_3
Starting up POPSGN (RELEASE OF 31DEC01)
Enter Idebug, Mname, Version (1 I, 2 A's) (NO COMMAS)
0 POPSDAT TST
**** MORE VALUES PLEASE :
>
POPSG1: Popsgen complete
POPSG1: ula 31DEC01 TST: Cpu= 0.1 Real= 57
[aips at ula AIPS]$ RUN SETPAR
Data disk assignments:
(Using global default file /home/aips/AIPS/DA00/DADEVS.LIST)
Disk 1 (1) is /home/aips/AIPS/DATA/ULA_1
Disk 2 (2) is /home/aips/AIPS/DATA/ULA_2
Disk 3 (3) is /home/aips/AIPS/DATA/ULA_3
Starting up SETPAR (RELEASE OF 31DEC01)
Enter: 1=Start Over, 2=Change parameters, 3=Change DEVTAB, 4=Quit
2
1 No. of AIPS data areas ("disks") 1
2 No. of tape drives 4
3 No. of lines per CRT page -1
4 No. of lines per print page 61
5 No. of batch queues 2
6 Plotter no. of X dots per page 2112
7 Plotter no. of Y dots per page 1600
8 Plotter no. of X dots per character 20
9 Plotter no. of Y dots per character 25
10 No. of interactive AIPS 8
11 No. of words in REAL AP (in 1024s) 64
12 No. of TV devices available 1
13 No. of graphics devices available 16
14 No. of X dots per mm on printer 7.830
15 No. of X dots per mm on tektronix 5.000
16 No. of POPS allowed access to TVs 35
17 No. of POPS allowed access to TKs 35
18 No. entries in private catalogs 100
19 Local system Registration (A20) UN-REGISTERED!!!!!!!
Registration key 1 is 0
Registration key 2 is 0
Registration key 3 is 0
Registration key 4 is 0
Registration key 5 is 0
Registration key 6 is 0
*** Registration not valid for any version
20 Maximum user number (<= 46655) 46655
21 TIMDEST minima disks 1 - 1 days 14.
22 TIMDEST limit: SAVE/GET files 28.
23 TIMDEST/EXIT limit: messages 3.
24 TIMDEST limit: scratch files 3.
25 TIMDEST limit: empty CA files 0.250
26 No AP batch starts: weekend hours 15.00016.500
No AP batch starts: weekday hours 13.00017.000
27 AP roll interval minutes 5.000
AP patience: (1)*N+(2)*N*N minutes 5.000 1.000
28 Line printer width (72 - 132) 132
29 Pseudo-AP 2nd memory (1024s) 1216
30 Max length of "short" vector 0
31 Graphics (TK) screen size: x, y 1024 780
32 Graphics (TK) character size: x, y 14 22
33 Disk & reserved users or -1 scratch (9 I)
Disk 1 Users 0
34 Delay time print file delete (secs) 300
35 Computer speed rating (AIPSmarks) 0.00
Enter number to change or 0 = Print, -1 = Return
35
35 Computer speed rating (AIPSmarks) 0.00
20
Enter number to change or 0 = Print, -1 = Return
-1
Password:
Enter: 1=Start Over, 2=Change parameters, 3=Change DEVTAB, 4=Quit
4
SETPA1: ula 31DEC01 TST: Cpu= 0.0 Real= 37
[aips at ula AIPS]$
####################
More information about the Daip
mailing list