[daip] FRPLT

[Mark Claussen]

Trying to run FRPLT with a minimum of input; the inputs
may not be quite correct to get what I want, but what I
get is:


>go
FRPLT2: Task FRPLT  (release of 31DEC01) begins
FRPLT2: You are using a non-standard program
FRPLT2: Plot fringe rate spectra
AIPS 2: Resumes
> ZMSGOP: NO ROOM IN FTAB FOR LUN = 12
ZTTOP2: error translating /dev/pts/3
ERROR  2 ASSIGNING OUTPUT TO /dev/pts/3      
 ZMSGOP: ZTTOPN RETURNS ERROR =   1 FOR LUN =   6
 ZMSGOP: NO ROOM IN FTAB FOR LUN = 12
ZTTOP2: error translating /dev/pts/3
ERROR  2 ASSIGNING OUTPUT TO /dev/pts/3      
 ZMSGOP: ZTTOPN RETURNS ERROR =   1 FOR LUN =   6
 ZMSGOP: NO ROOM IN FTAB FOR LUN = 12
ZTTOP2: error translating /dev/pts/3
ERROR  2 ASSIGNING OUTPUT TO /dev/pts/3      
 ZMSGOP: ZTTOPN RETURNS ERROR =   1 FOR LUN =   6
 ZMSGOP: NO ROOM IN FTAB FOR LUN = 12
ZTTOP2: error translating /dev/pts/3
ERROR  2 ASSIGNING OUTPUT TO /dev/pts/3      
 ZMSGOP: ZTTOPN RETURNS ERROR =   1 FOR LUN =   6



which I suspect has nothing to do with my inputs.  A change
to DOTV = -1 makes no difference in the result.  /dev/pts/3
is the terminal that I'm running AIPS from.



*****************  Here are the inputs  *********************


AIPS 2: FRPLT     Task to plot fringe rate spectra.
AIPS 2: Adverbs     Values                 Comments
AIPS 2: ----------------------------------------------------------------
AIPS 2: USERID        0                    User number
AIPS 2: INNAME     'BS090       '          Input UV file name (name)
AIPS 2: INCLASS    'FXPOL '                Input UV file name (class)
AIPS 2: INSEQ         1                    Input UV file name (seq. #)
AIPS 2: INDISK        1                    Input UV file disk unit #
AIPS 2: SOURCES    'G192.16         '      Source list
AIPS 2:            *rest ' '
AIPS 2: QUAL         -1                    Source qualifier -1=>all
AIPS 2: CALCODE    '    '                  Calibrator code '    '=>all
AIPS 2: SELBAND      -1                    Bandwidth to select (kHz)
AIPS 2: SELFREQ      -1                    Frequency to select (MHz)
AIPS 2: FREQID       -1                    Freq. ID to select.
AIPS 2: UVRANG        0           0        UV range to be plotted
AIPS 2: TIMERANG   *all 0                  Time range to be plotted
AIPS 2:                                    (has to be specified)
AIPS 2: STOKES     '    '                  Stokes type to select.
AIPS 2: BIF           0                    Lowest IF number 0=>all
AIPS 2: EIF           0                    Highest IF number 0=>all
AIPS 2: BCHAN       170                    Lowest channel number 0=>all
AIPS 2: ECHAN       172                    Highest channel number 0=>all
AIPS 2: SUBARRAY      0                    Subarray, 0=>all
AIPS 2: ANTENNAS   *all 0                  Antennas to select
AIPS 2: DOCALIB      -1                    If >0 calibrate data
AIPS 2:                                    = 2 calibrate weights
AIPS 2: GAINUSE       2                    CL (or SN) table to apply
AIPS 2: DOPOL        -1                    If >0 correct polarization.
AIPS 2: FLAGVER       0                    Flag table version
AIPS 2: DOBAND       -1                    If >0 apply bandpass cal.
AIPS 2:                                    Method used depends on value
AIPS 2:                                    of DOBAND (see HELP file).
AIPS 2: BPVER        -1                    Bandpass table version
AIPS 2: SMOOTH     *all 0                  Smoothing function. See
AIPS 2:                                    HELP SMOOTH for details.
AIPS 2: SHIFT         0           0        Position shift:
AIPS 2:                                    RA, Dec (arcsec)
AIPS 2:                                    0 => no shift
AIPS 2: APARM      *all 0                  Control information:
AIPS 2:                                    1: pre-average interval (sec)
AIPS 2:                                       = 0 => 2 sec
AIPS 2:                                    2: = 0 => self-scale
AIPS 2:                                       > 0 => fixed scale
AIPS 2:                                        (use APARM(3-6))
AIPS 2:                                    3: min. amplitude
AIPS 2:                                    4: max. amplitude
AIPS 2:                                    5: min. phase (degrees)
AIPS 2:                                    6: max. phase
AIPS 2:                                    7: plot type
AIPS 2:                                       = 0 fringe rate spectrum
AIPS 2:                                       = 1 visibility vs time
AIPS 2:                                    8: zero padding for FFT
AIPS 2:                                         1 =>  no padding
AIPS 2:                                         2 =>  N zeroes
AIPS 2:                                         3 => 2N zeroes etc.
AIPS 2:                                    9: no of frequency channels
AIPS 2:                                       to pre-average.
AIPS 2: BPARM      *all 0                  More control information:
AIPS 2:                                    1: If = 1 divide by 'channel
AIPS 2:                                       0' before plotting data.
AIPS 2:                                       0 => do not divide.
AIPS 2:                                    2: Start chn. of 'channel 0'
AIPS 2:                                       (0 => determined by FRPLT)
AIPS 2:                                    3: Stop chn. of 'channel 0'
AIPS 2:                                       (0 => determined by FRPLT)
AIPS 2:                                    4-10: unused
AIPS 2: LTYPE         3                    Type of labeling: 1 border,
AIPS 2:                                    2 no ticks, 3 - 6 standard,
AIPS 2:                                    7 - 10 only tick labels
AIPS 2:                                    <0 -> no date/time
AIPS 2: OUTFILE    '                                                '
AIPS 2:                                    Filename in which to write
AIPS 2:                                    spectrum. Default = ' ' =
AIPS 2: ** press RETURN for more, enter Q or next line to quit print **
AIPS 2:                                    do not write spectrum.
AIPS 2: BADDISK    *all 0                  Disks to avoid for scratch
AIPS 2: DOTV          1                    > 0 Do plot on the TV, else
AIPS 2:                                    make a plot file
AIPS 2: GRCHAN        0                    Graphics channel 0 => 1.