[daip] multiple images models for UVCON

[Leonia Kogan]

Aaron,

>endeav> UVCON1: The fourth character in the IN2CLASS can not be a digit!
I do not remember now why I made such a restriction. 
I'll investigate it now.
 
Use the verb RENAME to change the fourth character in the IN2CLASS for a letter.
Do it for say 10 facets.

Try UVCON and let me know the result.

Leonia






----- Begin Included Message -----

>From owner-daip at kochab.cv.nrao.edu Wed Apr  4 12:43 MDT 2001
X-Mailer: exmh version 2.1.1 10/15/1999
To: daip at cv3.cv.nrao.edu
cc: cohen at rsd.nrl.navy.mil
Subject: [daip] multiple images models for UVCON
Mime-Version: 1.0
Date: Wed, 04 Apr 2001 14:42:06 -0400
From: Aaron Cohen <cohen at omaha.nrl.navy.mil>
Sender: owner-daip at kochab.cv.nrao.edu
Precedence: bulk
X-Lines: 43
Status: RO

Dear Designated Aip,

I would like to use UVCON with a model that consists of a 
few hundred facets, each with its own CC table.  The facets 
are named as follows:

AIPS 1:  345 2000 XMM-UVC     .ICL001.    1 MA 04-APR-2001 14:17:40
AIPS 1:  346 2000 XMM-UVC     .ICL002.    1 MA 04-APR-2001 14:17:40
AIPS 1:  347 2000 XMM-UVC     .ICL003.    1 MA 04-APR-2001 14:17:40
... up to ...
AIPS 1:  685 2000 XMM-UVC     .ICL341.    1 MA 04-APR-2001 13:43:55

I first ran UVCON with the parameters:

...
AIPS 1: IN2NAME    'XMM-UVC     '          Model image name (name)
AIPS 1: IN2CLASS   'ICL001'                Model image name (class)
AIPS 1: IN2SEQ        1                    Model image name (seq. #)
AIPS 1: IN2DISK       9                    Model image disk unit #
...
AIPS 1: NMAPS       341                    No. maps to use for model.
...

This is how I would input a model into CALIB for example.  However with 
UVCON I received the following error:

endeav> UVCON1: Task UVCON  (release of 31DEC01) begins
endeav> UVCON1: The fourth character in the IN2CLASS can not be a digit!
endeav> UVCON1: Purports to die of UNNATURAL causes
endeav> UVCON1: endeavour    31DEC01 TST: Cpu=       0.0  Real=       0

I then tried leaving IN2CLASS blank and got:

endeav> UVCON1: ERROR  5 FINDING XMM-UVC     .ICL00A.  1     DISK=  9 USID=2000

So apparently this won't work for more than 9 facets.

Please let me know if you have any ideas on how I can use UVCON with
a model with many ( > 9 ) facets.

Thanks,
-Aaron



----- End Included Message -----