>go vlbarun AIPS 1: '=======================================================' AIPS 1: User 501 message file is empty AIPS 1: Deleted 4902 messages AIPS 1: VLBARUN: Applies amplitude and phase calibration to VLBA data ! AIPS 1: Adverbs Values Comments AIPS 1: ---------------------------------------------------------------- AIPS 1: AIPS 1: To run this procedure you MUST type RUN VLBAUTIL and AIPS 1: RUN VLBARUN first to define the procedures in AIPS. AIPS 1: AIPS 1: -- Load the data from disk -- AIPS 1: DATAIN *all ' ' Disk file name AIPS 1: DOUVCOMP -1 Compress data? Use -1, 0 or 1 AIPS 1: OUTNAME ' ' File name (name) AIPS 1: OUTDISK 1 Working disk with ample space AIPS 1: -- OR existing file -- AIPS 1: INNAME '12112CBAND' Input file name AIPS 1: INCLASS 'UVDATA' Input file class AIPS 1: INSEQ 1 Input file sequence number AIPS 1: INDISK 1 Disk number for input file AIPS 1: ----------------------------- AIPS 1: OPTYPE 'CONT' For CONT, PSEU or SPEC (LINE) AIPS 1: ----------------------------- AIPS 1: CLINT 0.25 CL table interval in minutes. AIPS 1: CHREFANT ' ' Reference antenna NAME AIPS 1: TIMERANG *all 0 A good bandpass scan, or use AIPS 1: scan# in TIMERANG(1)+rest=0 AIPS 1: INVERS -1 PC table to use AIPS 1: -1 => don't use Pulse cals AIPS 1: do manual phase cal AIPS 1: CALSOUR 'J0927+3902' List ALL Fring fit & CAL sour AIPS 1: 'J1214+0402' FIRST is bandpass calib AIPS 1: *rest ' ' AIPS 1: SOURCES 'J1214+0402' ONLY FOR PHASE REFERENCING: AIPS 1: 'IRAS12112+03' Source *PAIRS* to calibrate AIPS 1: *rest ' ' START each pair with phase AIPS 1: referencing calibrator, if AIPS 1: 2nd='*': all non-CALSOUR AIPS 1: are phase-referenced to 1st AIPS 1: INFILE *all ' ' Set to DELZN correction file AIPS 1: TECRFILE *all ' ' Local copy of TEC file AIPS 1: '' => download autmatically AIPS 1: '-' => don;t do this corr. AIPS 1: TECRTYPE ' ' type of IONEX file to AIPS 1: download ' ' -> 'jplg' AIPS 1: EOPSFILE *all ' ' Local copy of EOP file AIPS 1: '' => download autmatically AIPS 1: '-' => don;t do this corr. AIPS 1: ----------------------------- AIPS 1: SOLINT 2 Time interval for fringe-fit AIPS 1: CHINC 1 Channel increment in FRING AIPS 1: < 0 -> find from data AIPS 1: ----------------------------- AIPS 1: IMSIZE 6000 6000 Image size for target SOURCES AIPS 1: =-1 for no images AIPS 1: FACTOR 0 CALSOUR IMSIZE (FACTORx128) AIPS 1: ----------------------------- AIPS 1: DOCLIP 0 0 not 0 -> use CLIP on all AIPS 1: sources: gives clip levels AIPS 1: > 0 after amp cal AIPS 1: < 0 before amp cal & BPASS AIPS 1: BPASS5 0 Value for BPASSPRM(5) AIPS 1: controls normalization AIPS 1: see help AIPS 1: DOFLAG 0 > 0 -> use RFLAG on all AIPS 1: sources - clip level is AIPS 1: max (100, DOFLAG) if a AIPS 1: clip limit > 100 Jy is AIPS 1: desired (e.g. masers) AIPS 1: TYSMOLEV 0 > 0 -> clip level in TYSMO AIPS 1: ELEVLIM 0 > 0 -> flag elevation < AIPS 1: ELEVLIM AIPS 1: INTEXT *all ' ' Input flag commands AIPS 1: SELFCAL 0 > 0 => do selfcal on cals AIPS 1: CALTASK ' ' 'FRING', 'CALIB', 'CALIBS' AIPS 1: SMRATES *all 0 (1) > 0 -> smooth rates in AIPS 1: hours AIPS 1: (2) MWF width hours AIPS 1: (3) clip rates > SMRATES(3) AIPS 1: in mHz AIPS 1: Hint: when setting directory and e-mail lower-case AIPS 1: letters can be retained by NOT using the close quote. AIPS 1: DOPLOT 0 <= 0 no plots;=1 some plots AIPS 1: >1 huge number of plots AIPS 1: =0.25 if convert known bad AIPS 1: OUTFILE *all ' ' DIRECTORY FOR HTML AND PLOT AIPS 1: FILES: if you want an html AIPS 1: file with plots please set AIPS 1: the dir where the html and AIPS 1: plot files can be put. AIPS 1: OUTTEXT *all ' ' E-MAIL ADDRESS: if you want AIPS 1: an e-mail when the script AIPS 1: is complete, set the AIPS 1: address here. AIPS 1: BADDISK *all 0 Disks to avoid for scratch AIPS 1: 'DOING CONTINUUM PROCEDURE:' AIPS 1: 'WITH PULSE CAL AND FREQUENCY AVERAGING' AIPS 1: 'REFANT not set, will try to set a default' AIPS 1: 'REFANT SET TO ANTENNA #' 2 AIPS 1: 'WILL NOT DO CALSOUR IMAGES SMALLER THAN 128' AIPS 1: 'CALLING P_WCHSCAN' AIPS 1: Waiting for returned adverbs AIPS 1: Resumes AIPS 1: '-------------------------' AIPS 1: 'RUNNING_VLBATECR' AIPS 1: SYSTEM command to be executed is: AIPS 1: which curl >> /dev/tty AIPS 1: 'THE AUTOMATIC DOWNLOAD FAILED' AIPS 1: 'Your system does not have any of the three' AIPS 1: 'possible commands, wget, curl or ncftpget, that' AIPS 1: 'this script attempts to use to automatically' AIPS 1: 'download the IONEX file(s).' AIPS 1: 'Download the file(s) manually (see TECOR EXPLAIN' AIPS 1: ' file), and run TECOR.' AIPS 1: SYSTEM command to be executed is: AIPS 1: rm /tmp/jpl* >> /dev/tty rm: cannot remove '/tmp/jpl*': No such file or directory AIPS 1: 'RUNNING_VLBAEOPS' AIPS 1: 35 35 AIPS 1: 'Attempting to download file with correct EOPS' AIPS 1: SYSTEM command to be executed is: AIPS 1: which curl >> /dev/tty AIPS 1: 'THE AUTOMATIC DOWNLOAD FAILED' AIPS 1: 'Your system does not have the comand wget, curl' AIPS 1: 'or ncftpget one of which is needed to download' AIPS 1: 'the file from Goddard. If you are a Mac user,' AIPS 1: 'the wget and ncftpget commands exist in Fink.' AIPS 1: 'Download the file manually from:' AIPS 1: 'ftp://cddis.gsfc.nasa.gov/vlbi/gsfc/ancillary/' AIPS 1: 'solve_apriori/usno_finals.erp' AIPS 1: 'and run VLBAEOPS with the EOPSFILE parameter set.' AIPS 1: 'RUNNING_VLBACCOR' AIPS 1: Resumes AIPS 1: Resumes AIPS 1: Extension file type SN version 1 deleted AIPS 1: Resumes AIPS 1: Extension file type SN version 2 deleted AIPS 1: Resumes AIPS 1: 'SN #1 contains sampler corrections' AIPS 1: 'CL #2 adds sampler corrections' AIPS 1: 'RUNNING_VLBAMPCL' AIPS 1: 'RUN FRING' AIPS 1: Resumes AIPS 1: 'RUN CLCAL' AIPS 1: Resumes AIPS 1: 'SN #2 contains corrections from 1st run of FRING' AIPS 1: 'CL #3 adds instr. phase corrections' AIPS 1: 'RUNNING_VLBABPSS' AIPS 1: Resumes AIPS 1: 'BP #1 bandpass table' AIPS 1: 'RUNNING_VLBAAMP' AIPS 1: Resumes AIPS 1: Resumes AIPS 1: Extension file type SN version 3 deleted AIPS 1: Resumes AIPS 1: Extension file type SN version 4 deleted AIPS 1: Resumes AIPS 1: Resumes AIPS 1: Resumes AIPS 1: 'SN #3 contains sampler corrections' AIPS 1: 'SN #4 contains gain corrections' AIPS 1: 'CL #4 adds sampler corrections' AIPS 1: 'CL #5 adds gain corrections' AIPS 1: 'You should verify that these tables contain no' AIPS 1: 'bad points before continuing' AIPS 1: 'RUNNING_VLBAPANG' AIPS 1: Resumes AIPS 1: 'CL #6 adds parallactic angle corrections' AIPS 1: 'RUNNING_VLBAFRNG' AIPS 1: 'RUN FRING' AIPS 1: Resumes AIPS 1: 'RUN CLCAL' AIPS 1: Resumes AIPS 1: Resumes AIPS 1: 'SN #5 contains fringe solns for sources in calsour' AIPS 1: 'CL #7 adds fringe solns for sources in sources' AIPS 1: 'Doing phase reference targets' AIPS 1: 'RUNNING_CLCAL' AIPS 1: Resumes AIPS 1: '**J1214+0402: used to phase-reference :IRAS12112+03**' AIPS 1: '256 CHANNELS AVERAGED IN SINGLE SOURCE DATA' AIPS 1: 'RUNNING_SPLIT' AIPS 1: Resumes AIPS 1: 'CALIBRATOR :J0927+3902 BEING IMAGED NOW' AIPS 1: 'RUNNING_IMAGR' Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL AIPS 1: Resumes AIPS 1: 'CALIBRATOR :J1214+0402 BEING IMAGED NOW' AIPS 1: 'RUNNING_IMAGR' Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL AIPS 1: Resumes AIPS 1: ZAP MA file J0927+3902 .IBM001. 0 disk 1 AIPS 1: Destroyed 1 extension files of type HI AIPS 1: Destroyed MA image file: catno= 6 disk= 1 AIPS 1: ZAP MA file J1214+0402 .IBM001. 0 disk 1 AIPS 1: Destroyed 1 extension files of type HI AIPS 1: Destroyed MA image file: catno= 8 disk= 1 AIPS 1: Disk 1 in-CNO 7 renumbered as CNO 5 AIPS 1: Disk 1 in-CNO 9 renumbered as CNO 6 AIPS 1: 'TARGET :IRAS12112+03 BEING IMAGED NOW' AIPS 1: 'RUNNING_IMAGR' Note: The following floating-point exceptions are signalling: IEEE_UNDERFLOW_FLAG IEEE_DENORMAL AIPS 1: Resumes AIPS 1: ZAP MA file IRAS12112+03.?BM001. 0 disk 1 AIPS 1: Destroyed 1 extension files of type HI AIPS 1: Destroyed MA image file: catno= 8 disk= 1 AIPS 1: Disk 1 in-CNO 9 renumbered as CNO 7 AIPS 1: ' ' AIPS 1: 'SUMMARY OF THE CL-TABLES PRODUCED FOR THIS DATA:' AIPS 1: ' ' AIPS 1: 'CL-1 : Input CL table' AIPS 1: 'CL-1 : Ionospheric correction added' AIPS 1: 'CL-1 : EOP correction added' AIPS 1: 'CL-2 : Sampler corrections added' AIPS 1: 'CL-3 : Instr. Phase-cal added' AIPS 1: 'CL-4 : Post-BPASS sampler cor added' AIPS 1: 'CL-5 : Gain corrections added' AIPS 1: 'CL-6 : Parallactic angle correction added' AIPS 1: 'CL-7 : Fringe fit added - final CL table' AIPS 1: ' ' AIPS 1: 'USE P_ALLPLOT(X) TO PLOT FROM PL-VERSION X ON TV' AIPS 1: ' ' AIPS 1: 'PROCEDURE DONE, THANK YOU FOR CHOOSING AIPS FOR YOUR BUSINESS' AIPS 1: '=======================================================' >