SOURCE: 1328+307
>getn 8
AIPS 1: Got(1)   disk= 1  user=1407   type=MA   1328+307.ICL001.1
>tvinit
>tvlod
>tvstat
AIPS 1: >>>>>>>>>>>>> Begin setting region number   1
AIPS 1: Press button A to set intermediate vertex
AIPS 1: Press buttons B, C, or D to set final vertex
AIPS 1: C => then reset a vertex,  D => then exit
AIPS 1: Mean= 1.418E-01 rms= 1.009E+00 JY/BEAM  over        2433. pixels
AIPS 1: Maximum= 1.4670E+01 at    512    513     1    1    1    1    1
AIPS 1: Skypos: RA 13 28 49.657  DEC 30 45 58.64
AIPS 1: Skypos: IPOL  1477.400 MHz
AIPS 1: Minimum=-3.7692E-03 at    527    519     1    1    1    1    1
AIPS 1: Skypos: RA 13 28 45.909  DEC 30 46 17.96
AIPS 1: Skypos: IPOL  1477.400 MHz
AIPS 1: Flux density =  1.4689E+01 Jy   Beam area =    23.48 pixels

SETJY output
SETJY1: '1328+307        ' IF=  1 flux=   14.8073 (Jy calcd)
SETJY1: '1328+307        ' IF=  2 flux=   14.5546 (Jy calcd)


SOURCE: 1219+285
>getn 10
AIPS 1: Got(1)   disk= 1  user=1407   type=MA   1219+285.ICL001.1
>tvinit
>tvlod
>tvstat
AIPS 1: >>>>>>>>>>>>> Begin setting region number   1
AIPS 1: Press button A to set intermediate vertex
AIPS 1: Press buttons B, C, or D to set final vertex
AIPS 1: C => then reset a vertex,  D => then exit
AIPS 1: Mean= 2.622E-02 rms= 1.179E-01 JY/BEAM  over        3584. pixels
AIPS 1: Maximum= 1.1127E+00 at    512    513     1    1    1    1    1
AIPS 1: Skypos: RA 12 19 01.116  DEC 28 30 36.52
AIPS 1: Skypos: IPOL  1477.400 MHz
AIPS 1: Minimum=-1.0292E-03 at    497    521     1    1    1    1    1
AIPS 1: Skypos: RA 12 19 02.937  DEC 28 30 49.32
AIPS 1: Skypos: IPOL  1477.400 MHz
LOGFILE FOR USER 1407 GETTING LARGE: USE PRTMSG AND CLRMSG NOW!         
AIPS 1: Flux density =  1.1143E+00 Jy   Beam area =    84.34 pixels

GETJY output
GETJY1: 1219+285        :  0   A     1    1.11411 +/-   0.00276  0.00276
GETJY1:                              2    1.11161 +/-   0.00268  0.00268



