>inp AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version AIPS 1: Adverbs Values Comments AIPS 1: ---------------------------------------------------------------- AIPS 1: USERID 0 File owner number - ignored AIPS 1: INNAME 'J21352' Input UV file name (name) AIPS 1: INCLASS 'FULLFQ' Input UV file name (class) AIPS 1: INSEQ 6 Input UV file name (seq. #) AIPS 1: INDISK 2 Input UV file disk unit # AIPS 1: SOURCES 'J21352' Sources to plot, ' '=>all. AIPS 1: *rest ' ' AIPS 1: QUAL -1 Qualifier -1=>all AIPS 1: CALCODE ' ' Calibrator code ' '=>all AIPS 1: STOKES ' ' Stokes type to select. AIPS 1: SELBAND -1 Bandwidth to select (kHz) AIPS 1: SELFREQ -1 Frequency to select (MHz) AIPS 1: FREQID 1 Freq. ID to select. AIPS 1: TIMERANG *all 0 Time range to select AIPS 1: ANTENNAS *all 0 Antennas to plot AIPS 1: BASELINE *all 0 Baselines with ANTENNAS AIPS 1: UVRANGE 0 0 UV range in kilolambda. AIPS 1: SUBARRAY 0 Subarray, 0 => all AIPS 1: BCHAN 1 1st spectral channel # AIPS 1: ECHAN 0 Last spectral channel # AIPS 1: NCHAV 0 # of channels to average AIPS 1: CHINC 1 Increment in channel # AIPS 1: BIF 1 Low IF number to plot AIPS 1: EIF 0 Highest IF number to plot AIPS 1: DOCALIB -1 > 0 calibrate data & weights AIPS 1: > 99 do NOT calibrate weights AIPS 1: GAINUSE 2 CAL (CL or SN) table to apply AIPS 1: DOPOL -1 If >0 correct polarization. AIPS 1: PDVER 0 PD table to apply (DOPOL>0) AIPS 1: BLVER -1 BL table to apply. AIPS 1: FLAGVER 0 Flag table version AIPS 1: DOBAND -1 If >0 apply bandpass cal. AIPS 1: Method used depends on value AIPS 1: of DOBAND (see HELP file). AIPS 1: BPVER -1 Bandpass table version AIPS 1: SMOOTH *all 0 Smoothing function. See AIPS 1: HELP SMOOTH for details. AIPS 1: XINC 50 Plot every XINC'th visibility AIPS 1: 0 => 1. AIPS 1: APARM *all 0 Control parameters for UV AIPS 1: 1: min of W range, klambda AIPS 1: 2: max of W range, klambda AIPS 1: 3: plot both halfs of UV(W)? AIPS 1: 0 => plot both halfs AIPS 1: -1 => plot one UV half AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** # AIPS 1: +1 => plot another U,V AIPS 1: half AIPS 1: BPARM 11 13 Control parameters AIPS 1: *rest 0 1 : X-axis type 0=>UV dist AIPS 1: 2 : Y-axis type 0=>Ampl AIPS 1: 1=> amplitude (Jy) AIPS 1: 2=> phase (degrees) AIPS 1: 3=> uv dist. (klambda) AIPS 1: 4=> uv p.a. (deg N->E) AIPS 1: 5=> time (IAT days) AIPS 1: 6=> u (klambda) AIPS 1: 7=> v (klambda) AIPS 1: 8=> w (klambda) AIPS 1: 9=> Re(Vis) (Jy) AIPS 1: 10=> Im(Vis) (Jy) AIPS 1: 11=> time (IAT hours) AIPS 1: 12=> log10 (ampl) AIPS 1: 13=> weight AIPS 1: 14=> HA (hours) AIPS 1: 15=> elevation (deg) AIPS 1: 16=> parallactic angle AIPS 1: 17=> uv dist. (klambda) AIPS 1: along p.a. AIPS 1: 18=> azimuth (deg) AIPS 1: 3 : > 0.0 => fixed scale AIPS 1: < 0.0 => fixed range AIPS 1: 4 : Xmin (fixed scale) AIPS 1: 5 : Xmax (fixed scale) AIPS 1: 6 : Ymin (fixed scale) AIPS 1: 7 : Ymax (fixed scale) AIPS 1: 8 : Number of bins in plot. AIPS 1: <0 points and binned AIPS 1: 9 : > 0 => list bin values. AIPS 1: 10: > 0 => plot auto-corr too AIPS 1: BPARM=6,7,2,0 generates AIPS 1: square UV coverage plots AIPS 1: DOWEIGHT 0 > 0 use weights in binning AIPS 1: REFANT 6 > 0 => use REFANT for plot AIPS 1: types 14, 15, 16, 18 AIPS 1: ROTATE 0 uv p.a. for projection AIPS 1: (deg N->E); type 17 only AIPS 1: FACTOR 0 Scale dots by FACTOR AIPS 1: < 0 => connect dots too AIPS 1: DO3COL 1 > 0 use 3-color to separate AIPS 1: channels and IFs. AIPS 1: LTYPE 3 Type of labeling: 1 border, AIPS 1: 2 no ticks, 3 - 6 standard, AIPS 1: 7 - 10 only tick labels AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** # AIPS 1: <0 -> no date/time AIPS 1: BADDISK *all 0 Disk to avoid for scratch. AIPS 1: DOTV 1 > 0 Do plot on the TV, else AIPS 1: make a plot file AIPS 1: GRCHAN 0 Graphics channel 0 => 1. AIPS 1: XYRATIO 0 X/Y ratio 0 -> fit TV or 1 PL