Field 2, cleaning done in field 2
  Task IMFIT  (release of 31DEC08) begins
  Fit to histogram gives RMS = 3.332E-02
  Model fit to Test UVMOD  .ICL002.   1
  Source= SNAKEP1  in units JY/BEAM
  X-ref pix= 512.0  RA 17 42 15.000      Pix sep (asec) -4.0000
  Y-ref pix= 513.0  DEC -29 39 20.00     Pix sep (asec)  4.0000
  Axes 3-7 pixels =      1      1      1      1      1
  Axis 3 : IPOL
  Axis 4 : 324.385 MHZ
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ******** Input Model ****************************************
  Component=  1  Gaussian
        Peak= 9.9815E+00    JY/BEAM
        Xpos=  512.00      Ypos=  513.00     pixels
        Size=  13.15 ** x  10.44 ** Pixels at pa -80.52 ** deg
  Component=  2  Baseline
        Zero lev= 0.0000E+00    JY/BEAM
                     ** means parameter is held fixed
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
        Beam=  13.15    X  10.44    Pixels: in pa-80.52    Deg

  Initial guess RMS  2.8936E-02 in 3551 usable pixels
  IMPROPER INPUT PARAMETERS.  NITER=    2
  ******  RMS of fit=  1.4773E+00 per point  ******
  Begin tweaking each parameter
  ******  New RMS of fit=  2.8483E-02 per point  ******
  Writing MF file version   1 attached to input image

  ********* Solution from IMFIT *********************************
  Error estimate based on rms 3.332E-02 JY/BEAM

  Component   1 - Gaussian
    Peak intensity    = 9.9865E+00 +/-  3.33E-02 JY/BEAM
    Integral intensity= 9.9865E+00 +/-  3.33E-02 JANSKYS
    X-position        =    512.011 +/-   0.0185 pixels
    Y-position        =    513.000 +/-   0.0149 pixels
                        RA 17 42 14.996      +/-    0.006
                        DEC -29 39 20.00     +/-     0.06
    Major axis        =  13.149 +/-  0.0000 pixels
    Minor axis        =  10.441 +/-  0.0000 pixels
    Position angle    =  99.476 +/-  0.000 degrees
    Major axis        =  52.598 +/-   0.000 asec
    Minor axis        =  41.766 +/-   0.000 asec
    Position angle    =  99.476 +/-  0.000 degrees
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                    Deconvolution of component in pixels
                         Nominal     Minimum     Maximum
      Major ax             0.000       0.000       0.000
      Minor ax             0.000       0.000       0.000
      Pos ang              0.000       0.000       0.000
                    Deconvolution of component in asec
                         Nominal     Minimum     Maximum
      Major ax          0.000000    0.000000    0.000000
      Minor ax          0.000000    0.000000    0.000000
      Pos ang           0.000000    0.000000    0.000000
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Component   2 - Baseline
    Zero level=  1.9598E-03( 8.7193E-03)  Ampl. units
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  returns adverbs to AIPS
  Appears to have ended successfully
  primate 31DEC08 TST: Cpu=      0.1  Real=      0  IO=         9

******************************************************************
Field 1 cleaning done in field 2
  Task IMFIT  (release of 31DEC08) begins
  Fit to histogram gives RMS = 3.217E-02
  Model fit to Test UVMOD  .ICL001.   1
  Source= SNAKEP1  in units JY/BEAM
  X-ref pix= 512.0  RA 17 42 15.000      Pix sep (asec) -4.0000
  Y-ref pix= 513.0  DEC -29 55 60.00     Pix sep (asec)  4.0000
  Axes 3-7 pixels =      1      1      1      1      1
  Axis 3 : IPOL
  Axis 4 : 324.385 MHZ
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ******** Input Model ****************************************
  Component=  1  Gaussian
        Peak= 1.0067E+01    JY/BEAM
        Xpos=  512.00      Ypos=  763.00     pixels
        Size=  13.15 ** x  10.53 ** Pixels at pa -80.11 ** deg
  Component=  2  Baseline
        Zero lev= 0.0000E+00    JY/BEAM
                     ** means parameter is held fixed
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
        Beam=  13.15    X  10.53    Pixels: in pa-80.11    Deg

  Initial guess RMS  3.1117E-02 in 2820 usable pixels
  Solution unchanging.  niter=   18
  ******  RMS of fit=  2.9932E-02 per point  ******
  Begin tweaking each parameter
  ******  New RMS of fit=  2.9948E-02 per point  ******
  Writing MF file version   1 attached to input image

  ********* Solution from IMFIT *********************************
  Error estimate based on rms 3.217E-02 JY/BEAM

  Component   1 - Gaussian
    Peak intensity    = 1.0028E+01 +/-  3.22E-02 JY/BEAM
    Integral intensity= 1.0028E+01 +/-  3.22E-02 JANSKYS
    X-position        =    512.023 +/-   0.0178 pixels
    Y-position        =    763.009 +/-   0.0145 pixels
                        RA 17 42 14.993      +/-    0.005
                        DEC -29 39 19.96     +/-     0.06
    Major axis        =  13.146 +/-  0.0000 pixels
    Minor axis        =  10.534 +/-  0.0000 pixels
    Position angle    =  99.888 +/-  0.000 degrees
    Major axis        =  52.583 +/-   0.000 asec
    Minor axis        =  42.138 +/-   0.000 asec
    Position angle    =  99.888 +/-  0.000 degrees
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                    Deconvolution of component in pixels
                         Nominal     Minimum     Maximum
      Major ax             0.000       0.000       0.000
      Minor ax             0.000       0.000       0.000
      Pos ang              0.000       0.000       0.000
                    Deconvolution of component in asec
                         Nominal     Minimum     Maximum
      Major ax          0.000000    0.000000    0.000000
      Minor ax          0.000000    0.000000    0.000000
      Pos ang           0.000000    0.000000    0.000000
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Component   2 - Baseline
    Zero level=  1.4000E-03( 2.1904E-03)  Ampl. units
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  returns adverbs to AIPS
  Appears to have ended successfully
  primate 31DEC08 TST: Cpu=      0.2  Real=      1  IO=         9

*******************************************************************
Field 1 cleaning done in field 1
  Task IMFIT  (release of 31DEC08) begins
  Fit to histogram gives RMS = 3.206E-02
  Model fit to Test UVMOD  .ICL001.   2
  Source= SNAKEP1  in units JY/BEAM
  X-ref pix= 512.0  RA 17 42 15.000      Pix sep (asec) -4.0000
  Y-ref pix= 513.0  DEC -29 55 60.00     Pix sep (asec)  4.0000
  Axes 3-7 pixels =      1      1      1      1      1
  Axis 3 : IPOL
  Axis 4 : 324.385 MHZ
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ******** Input Model ****************************************
  Component=  1  Gaussian
        Peak= 9.9417E+00    JY/BEAM
        Xpos=  512.00      Ypos=  764.00     pixels
        Size=  13.15 ** x  10.53 ** Pixels at pa -80.11 ** deg
  Component=  2  Baseline
        Zero lev= 0.0000E+00    JY/BEAM
                     ** means parameter is held fixed
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
        Beam=  13.15    X  10.53    Pixels: in pa-80.11    Deg

  Initial guess RMS  9.1427E-02 in 2820 usable pixels
  Solution unchanging.  niter=   18
  ******  RMS of fit=  8.5448E-02 per point  ******
  Begin tweaking each parameter
  ******  New RMS of fit=  8.5454E-02 per point  ******
  Writing MF file version   1 attached to input image

  ********* Solution from IMFIT *********************************
  Error estimate based on rms 3.206E-02 JY/BEAM

  Component   1 - Gaussian
    Peak intensity    = 9.9595E+00 +/-  3.21E-02 JY/BEAM
    Integral intensity= 9.9595E+00 +/-  3.21E-02 JANSKYS
    X-position        =    512.076 +/-   0.0179 pixels
    Y-position        =    764.113 +/-   0.0145 pixels
                        RA 17 42 14.977      +/-    0.005
                        DEC -29 39 15.54     +/-     0.06
    Major axis        =  13.146 +/-  0.0000 pixels
    Minor axis        =  10.534 +/-  0.0000 pixels
    Position angle    =  99.888 +/-  0.000 degrees
    Major axis        =  52.583 +/-   0.000 asec
    Minor axis        =  42.138 +/-   0.000 asec
    Position angle    =  99.888 +/-  0.000 degrees
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                    Deconvolution of component in pixels
                         Nominal     Minimum     Maximum
      Major ax             0.000       0.000       0.000
      Minor ax             0.000       0.000       0.000
      Pos ang              0.000       0.000       0.000
                    Deconvolution of component in asec
                         Nominal     Minimum     Maximum
      Major ax          0.000000    0.000000    0.000000
      Minor ax          0.000000    0.000000    0.000000
      Pos ang           0.000000    0.000000    0.000000
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Component   2 - Baseline
    Zero level=  5.6694E-03( 6.2508E-03)  Ampl. units
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  returns adverbs to AIPS
  Appears to have ended successfully
  primate 31DEC08 TST: Cpu=      0.2  Real=      0  IO=         9

********************************************************************
Field 2 - but cleaning done in field 1
  Task IMFIT  (release of 31DEC08) begins
  Fit to histogram gives RMS = 3.265E-02
  Model fit to Test UVMOD  .ICL002.   2
  Source= SNAKEP1  in units JY/BEAM
  X-ref pix= 512.0  RA 17 42 15.000      Pix sep (asec) -4.0000
  Y-ref pix= 513.0  DEC -29 39 20.00     Pix sep (asec)  4.0000
  Axes 3-7 pixels =      1      1      1      1      1
  Axis 3 : IPOL
  Axis 4 : 324.385 MHZ
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ******** Input Model ****************************************
  Component=  1  Gaussian
        Peak= 9.8903E+00    JY/BEAM
        Xpos=  512.00      Ypos=  514.00     pixels
        Size=  13.15 ** x  10.44 ** Pixels at pa -80.52 ** deg
  Component=  2  Baseline
        Zero lev= 0.0000E+00    JY/BEAM
                     ** means parameter is held fixed
   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
        Beam=  13.15    X  10.44    Pixels: in pa-80.52    Deg

  Initial guess RMS  8.3278E-02 in 3584 usable pixels
  IMPROPER INPUT PARAMETERS.  NITER=    2
  ******  RMS of fit=  1.4571E+00 per point  ******
  Begin tweaking each parameter
  ******  New RMS of fit=  7.9094E-02 per point  ******
  Writing MF file version   1 attached to input image

  ********* Solution from IMFIT *********************************
  Error estimate based on rms 3.265E-02 JY/BEAM

  Component   1 - Gaussian
    Peak intensity    = 9.9301E+00 +/-  3.26E-02 JY/BEAM
    Integral intensity= 9.9301E+00 +/-  3.26E-02 JANSKYS
    X-position        =    512.042 +/-   0.0183 pixels
    Y-position        =    514.058 +/-   0.0147 pixels
                        RA 17 42 14.987      +/-    0.006
                        DEC -29 39 15.77     +/-     0.06
    Major axis        =  13.149 +/-  0.0000 pixels
    Minor axis        =  10.441 +/-  0.0000 pixels
    Position angle    =  99.476 +/-  0.000 degrees
    Major axis        =  52.598 +/-   0.000 asec
    Minor axis        =  41.766 +/-   0.000 asec
    Position angle    =  99.476 +/-  0.000 degrees
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                    Deconvolution of component in pixels
                         Nominal     Minimum     Maximum
      Major ax             0.000       0.000       0.000
      Minor ax             0.000       0.000       0.000
      Pos ang              0.000       0.000       0.000
                    Deconvolution of component in asec
                         Nominal     Minimum     Maximum
      Major ax          0.000000    0.000000    0.000000
      Minor ax          0.000000    0.000000    0.000000
      Pos ang           0.000000    0.000000    0.000000
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Component   2 - Baseline
    Zero level=  3.7940E-03( 1.4590E-02)  Ampl. units
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  returns adverbs to AIPS
  Appears to have ended successfully
  primate 31DEC08 TST: Cpu=      0.1  Real=      0  IO=         9
